Muffler - Remove and Install
- Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Show/hide table
Illustration 1 g01227266 - Remove access panel (1) from enclosure (2).
Show/hide table
Illustration 2 g01227268 - Remove bolts (3) in order to remove guard (4) from enclosure (2).
Show/hide table
Illustration 3 g01227271 - Loosen clamp (5).
Show/hide table
Illustration 4 g01227272 - Loosen clamp (7) in order to remove exhaust pipe (6).
Show/hide table
Illustration 5 g01227274 - Attach a suitable lifting device onto muffler assembly (8). The weight of muffler assembly (8) is approximately
204 kg (450 lb) .Show/hide tableIllustration 6 g01227276 - Remove bolts (9). Remove muffler assembly (8).
- Attach a suitable lifting device onto muffler assembly (8). The weight of muffler assembly (8) is approximately
204 kg (450 lb) . Install muffler assembly (8).Show/hide tableIllustration 8 g01227276 - Install bolts (9) to muffler assembly (8).
Show/hide table
Illustration 9 g01227272 - Install exhaust pipe (6). Tighten clamp (7).
Show/hide table
Illustration 10 g01227271 - Tighten clamp (5).
Show/hide table
Illustration 11 g01227268 - Install guard (4) onto enclosure (2). Install bolts (3).
Show/hide table
Illustration 12 g01227266 - Install access panel (1) to enclosure (2).
- Connect the battery. Refer to Disassembly and Assembly, "Battery or Battery Cable - Connect".
Show/hide table
Illustration 7 | g01227274 |
Caterpillar Information System:
C7 On-highway Engine Engine Oil Pan
C9 Generator Set Engine Engine Enclosure Group - Install
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C3.3 Industrial Engine Crankshaft Seals
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
2005/12/19 The New Low Gas Pressure Module is Now Available {1901}
2008/07/07 Coolant Sensor Installation Service Notes {5574}
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
3500 Locomotive Engines Pressure Gauge
3126B and 3126E Truck Engines Engine Oil Filter Base
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Engine Lifting Bracket
C3.3 Industrial Engine Flywheel Housing
C3.3 Industrial Engine Flywheel
C3.3 Industrial Engine Piston Cooling Jet
C3.3 Industrial Engine Piston and Rings
C3.3 Industrial Engine Connecting Rod - For Use With Steel Crankshaft
C3.3 Industrial Engine Main Bearing Journal - Steel Crankshaft
C3.3 Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
C9 Generator Set Engine Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove