Engine Enclosure Group - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9200 | Lever Puller Hoist | 1 |
B | 138-7574 | Link Bracket | 4 |
- Attach Tooling (A) and Tooling (B) onto engine enclosure (2). Attach a suitable lifting device onto Tooling (A) and Tooling (B). The weight of engine enclosure (2) is approximately
680 kg (1500 lb) . Use Tooling (B) in order to level engine enclosure (2). Install engine enclosure (2).Show/hide tableIllustration 2 g01223113 - Connect harness assembly (9). Install new cable straps.
Show/hide table
Illustration 3 g01223112 - Install bolts (7) into the bottom side of frame assembly (8).
Show/hide table
Illustration 4 g01223111 - Install bolts (6) into engine enclosure (2).
Show/hide table
Illustration 5 g01223110 - Install bolts (5) into engine enclosure (2).
Show/hide table
Illustration 6 g01223109 - Install bracket assembly (4) in engine enclosure (2). Repeat for the opposite side.
Show/hide table
Illustration 7 g01223106 - Connect harness assembly (3) to the lights. Repeat for the opposite side.
Show/hide table
Illustration 8 g01223104 - Install panel (1) to engine enclosure (2).
- Connect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Connect".
Show/hide table
Illustration 1 | g01223114 |
Caterpillar Information System:
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C3.3 Industrial Engine Crankshaft Seals
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
2005/12/19 The New Low Gas Pressure Module is Now Available {1901}
2008/07/07 Coolant Sensor Installation Service Notes {5574}
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
3500 Locomotive Engines Pressure Gauge
3126B and 3126E Truck Engines Engine Oil Filter Base
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
3126B and 3126E Truck Engines Camshaft
C7 On-highway Engine Engine Oil Pan
C9 Generator Set Engine Muffler - Remove and Install
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Engine Lifting Bracket
C3.3 Industrial Engine Flywheel Housing
C3.3 Industrial Engine Flywheel
C3.3 Industrial Engine Piston Cooling Jet
C3.3 Industrial Engine Piston and Rings
C3.3 Industrial Engine Connecting Rod - For Use With Steel Crankshaft
C3.3 Industrial Engine Main Bearing Journal - Steel Crankshaft