Pressure Gauge
Show/hide table
Illustration 1 | g01226867 |
Show/hide table
Calibration Chart     | |||
Pointer Position     | kPa     | psi     | Direction of pointer travel.     |
A     | 0 + 27 - 0     | 0 + 4 - 0     | Clockwise     |
B     | 100 ± 7     | 14 ± 1     | Clockwise     |
C     | 206.9 + 0 - 45     | 30 + 0 - 6     | Clockwise     |
Caterpillar Information System:
3126B and 3126E Truck Engines Engine Oil Filter Base
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
3126B and 3126E Truck Engines Camshaft
C3.3 Industrial Engine Turbocharger - Remove
C3.3 Industrial Engine Fuel Injection Pump - Install - Delphi DP210
C3.3 Industrial Engine Water Temperature Regulator and Housing
C3.3 Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
C3.3 Industrial Engine Fuel Injector Cover - Remove and Install - If Equipped
C3.3 Industrial Engine Crankcase Breather
C7 and C9 Marine Engines CID 0006 FMI 11 Cylinder #6 Injector fault
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
2008/07/07 Coolant Sensor Installation Service Notes {5574}
2005/12/19 The New Low Gas Pressure Module is Now Available {1901}
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
C3.3 Industrial Engine Crankshaft Seals
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C9 Generator Set Engine Engine Enclosure Group - Install
C7 On-highway Engine Engine Oil Pan
C9 Generator Set Engine Muffler - Remove and Install
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
C3.3 Industrial Engine Crankshaft Pulley