Fuel Injector Cover - Remove and Install - If Equipped
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean all of the outer surfaces of the cover (1) for the fuel injectors.
- Remove the setscrews (2) from the cover (1).
- Remove the cover (1).
Show/hide table
| |
| Illustration 1 | g01230085 |
|
Typical example | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean all of the inner surfaces of the cover (1) for the fuel injectors.
- Install the cover (1).
- Install the setscrews (2) for the cover (1). Tighten the setscrews (2) to a torque of
9 N·m (7 lb ft) .
Show/hide table
|
| |
| Illustration 2 | g01230085 |
|
Typical example | |
Caterpillar Information System:
C3.3 Industrial Engine Crankcase Breather
C7 and C9 Marine Engines CID 0006 FMI 11 Cylinder #6 Injector fault
C3.3 Industrial Engine Fuel Injection Lines - Install
C7 and C9 Marine Engines CID 0005 FMI 11 Cylinder #5 Injector fault
C3.3 Industrial Engine Cylinder Head Valves
TH48-E80 Petroleum Transmission Gear Pump (Transmission)
C7 and C9 Marine Engines CID 0004 FMI 11 Cylinder #4 Injector fault
C7 and C9 Marine Engines CID 0003 FMI 11 Cylinder #3 Injector fault
C7 and C9 Marine Engines CID 0002 FMI 11 Cylinder #2 Injector fault
C7 and C9 Marine Engines CID 0001 FMI 11 Cylinder #1 Injector fault
C3.3 Industrial Engine Lifter Group
C3.3 Industrial Engine Fuel Injectors
C3.3 Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
C3.3 Industrial Engine Water Temperature Regulator and Housing
C3.3 Industrial Engine Fuel Injection Pump - Install - Delphi DP210
C3.3 Industrial Engine Turbocharger - Remove
3126B and 3126E Truck Engines Camshaft
C3.3 Industrial Engine Turbocharger - Install
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
3126B and 3126E Truck Engines Engine Oil Filter Base
3500 Locomotive Engines Pressure Gauge
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
2008/07/07 Coolant Sensor Installation Service Notes {5574}