Engine Oil Pan
Show/hide table
Illustration 1 | g01227259 |
Note: The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The oil pan must be assembled and tightened to the cylinder block within ten minutes of applying sealant.
Apply 4C-9612 Silicone Sealant to a bead of 5 mm (0.2 inch) at four places on the sealing surface of the oil pan. The sealing surfaces are the following areas:
- Connecting joint of the flywheel housing and the rear of the cylinder block
- Connecting joint of the front housing and the front of the cylinder block
(1) Torque for the O-ring plug ... 25 ± 5 N·m (18 ± 4 lb ft)
(2) Torque for the O-ring plug ... 50 ± 7 N·m (37 ± 5 lb ft)
(3) Torque for the drain plug assembly ... 35 ± 5 N·m (26 ± 4 lb ft)
Caterpillar Information System:
C9 Generator Set Engine Engine Enclosure Group - Install
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C3.3 Industrial Engine Crankshaft Seals
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
2005/12/19 The New Low Gas Pressure Module is Now Available {1901}
2008/07/07 Coolant Sensor Installation Service Notes {5574}
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
3500 Locomotive Engines Pressure Gauge
3126B and 3126E Truck Engines Engine Oil Filter Base
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
C9 Generator Set Engine Muffler - Remove and Install
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Engine Lifting Bracket
C3.3 Industrial Engine Flywheel Housing
C3.3 Industrial Engine Flywheel
C3.3 Industrial Engine Piston Cooling Jet
C3.3 Industrial Engine Piston and Rings
C3.3 Industrial Engine Connecting Rod - For Use With Steel Crankshaft
C3.3 Industrial Engine Main Bearing Journal - Steel Crankshaft
C3.3 Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft