Piston Cooling Jet
Note: The three cylinder naturally aspirated engine may have installed piston cooling jets as an option.
Show/hide table
Illustration 1 | g00942652 |
(1) Installed piston cooling jets |
The valve that is spring loaded must move freely. Tighten the bolt to the following torque. ...
Show/hide table
Illustration 2 | g01006929 |
(2) Piston cooling jet
(3) Rod (4) Cylinder block |
Use the following procedure in order to check the alignment of the piston cooling jet.
- Insert rod (3) into the end of the piston cooling jet (2). Rod (3) has a diameter of
1.70 mm (0.067 inch) . Rod (3) must protrude out of the top of the cylinder block. - Dimension (A) is
55.25 mm (2.1752 inch) and dimension (B) is14 mm (0.5512 inch) . Dimension (A) and dimension (B) are tangent to the cylinder bore (4). - The position of the rod (3) must be within dimension (C). Dimension (C) is
14 mm (0.5512 inch) .
Caterpillar Information System:
C3.3 Industrial Engine Flywheel
C3.3 Industrial Engine Flywheel Housing
C3.3 Industrial Engine Engine Lifting Bracket
C3.3 Industrial Engine Crankshaft Pulley
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
C9 Generator Set Engine Muffler - Remove and Install
C7 On-highway Engine Engine Oil Pan
C9 Generator Set Engine Engine Enclosure Group - Install
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C3.3 Industrial Engine Crankshaft Seals
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
C3.3 Industrial Engine Piston and Rings
C3.3 Industrial Engine Connecting Rod - For Use With Steel Crankshaft
C3.3 Industrial Engine Main Bearing Journal - Steel Crankshaft
C3.3 Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
C9 Generator Set Engine Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
EMCP3 Engine Setpoint Verification - Test
C7 Marine Engine Alternator and Regulator
C7 Marine Engine Alternator and Regulator
C9 Generator Set Engine Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
C11 and C13 Engines Water Pump
320D and 323D Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
3512B Oil Well Servicing Engine (ADEM III) Analog Sensor (Active)