The original size of the main bearing journal ...
Maximum permissible wear of the main bearing journals ...
Radius of the fillet of the main bearing journals ...
Surface finish of bearing journals, crank pins, and radii ... 0.4 microns (16 µ inches)
The shell for the main bearings
The shells for the main bearings are available for remachined journals which have the following undersize dimensions.
- Undersize bearing shell ...
0.25 mm (0.010 inch) - Undersize bearing shell ...
0.51 mm (0.020 inch) - Undersize bearing shell ...
0.75 mm (0.030 inch) - Undersize bearing shell ...
Thickness at center of the shells ...
Width of the main bearing shells ...
Clearance between the bearing shell and the main bearing journals ...