C9 Generator Set Engine Caterpillar

Removal Procedure

Start By:

1. Remove the enclosure. Refer to Disassembly and Assembly, "Engine Enclosure Group - Remove".

Show/hide table

NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.

1. Drain the coolant into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
   Show/hide table

   Illustration 1	g01227442

2. Remove panel (1) from cooling system package (2).
   Show/hide table

   Illustration 2	g01227444

3. Disconnect hose (3), hose (4), and hose (6) from cooling system package (2). Disconnect harness assembly (5).
   Show/hide table

   Illustration 3	g01227447

4. Disconnect hose (7) from cooling system package (2).
   Show/hide table

   Illustration 4	g01227449

5. Remove fan guard assembly (8) from cooling system package (2).
   Show/hide table

   Illustration 5	g01227453

6. Disconnect hose (9) and hose (10) from cooling system package (2).
   Show/hide table

   Illustration 6	g01227454

7. Remove bracket (11). Disconnect hose (12) from cooling system package (2).
   Show/hide table

   Illustration 7	g01227457

8. Disconnect hose assemblies (13) and (14).
   Show/hide table

   Illustration 8	g01227458

9. Attach Tooling (A) and a suitable lifting device to cooling system package (2). The weight of cooling system package (2) is approximately 154 kg (340 lb).
   Show/hide table

   Illustration 9	g01227460

10. Remove bolts (15) from both sides of cooling system package (2). Remove cooling system package (2).