Crankshaft Seals
Show/hide table
| |
| Illustration 1 | g00915078 |
(1) Crankshaft
(2) Plastic sleeve
(3) Crankshaft seal
(4) Alignment tool
Show/hide table
| |
| Illustration 2 | g00915076 |
(5) Tighten bolts 1, 2, 3, 4, 5, 6, 7, and 10 in the sequence that is shown in Illustration 2 to the following torque. ...
Remove the alignment tool.
Tighten bolts 8 and 9 in the sequence that is shown in Illustration 2 to the following torque. ...
Caterpillar Information System:
C175 Generator Set Engines Connecting Rod Bearings - Remove and Install
2005/12/19 The New Low Gas Pressure Module is Now Available {1901}
2008/07/07 Coolant Sensor Installation Service Notes {5574}
2008/07/14 Coolant Level Sensor Installation Service Notes {5574}
3500 Locomotive Engines Pressure Gauge
3126B and 3126E Truck Engines Engine Oil Filter Base
TH48-E80 Petroleum Transmission Relief Pressures for Control Manifold - Testing and Adjusting
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
3126B and 3126E Truck Engines Camshaft
C3.3 Industrial Engine Turbocharger - Remove
C3.3 Industrial Engine Fuel Injection Pump - Install - Delphi DP210
C6.6 Engines for Caterpillar Built Machines Gear Group (Front)
C9 Generator Set Engine Engine Enclosure Group - Install
C7 On-highway Engine Engine Oil Pan
C9 Generator Set Engine Muffler - Remove and Install
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201} Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
3512B Oil Well Servicing Engine (ADEM III) Air Shutoff System
C3.3 Industrial Engine Crankshaft Pulley
C3.3 Industrial Engine Engine Lifting Bracket
C3.3 Industrial Engine Flywheel Housing
C3.3 Industrial Engine Flywheel
C3.3 Industrial Engine Piston Cooling Jet
C3.3 Industrial Engine Piston and Rings