Correction to Testing and Adjusting , "Torque Converter Stall and Implement Pump Double Stall - Test" {3101, 5055, 5084}
- Wheel Tractor:
- 844 (S/N: BBN1-UP; 2KZ1-UP)
A portion of existing information is incorrect. Replace the last paragraph in the section "Implement Pump Double Stall Test" with the following information. The remainder of the information is correct.
The correct engine speed for the implement pump double stall test for the 844 Wheel Tractor in third speed forward is 1735 ± 75 rpm.
Caterpillar Information System:
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Assemble
3500B Series II Marine Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060} Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
966H and 972H Wheel Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Install
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Remove
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Disassemble
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Remove
525C, 535C and 545C Wheel Skidders Grapple Pressure Sensor (Grapple Oil)
C27 and C32 Tier 4 Engines Flywheel
C7 Engines for Caterpillar Built Machines Crankshaft - Install
3516B Off-Highway Trucks Factory Passwords Worksheet
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Remove
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Install
525C, 535C and 545C Wheel Skidders Grapple Grapple Frame
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Radiator Module - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Hydraulic Tank
966H and 972H Wheel Loaders Machine Systems Bucket - Remove
966H and 972H Wheel Loaders Machine Systems Bucket - Install
966H and 972H Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
966H and 972H Wheel Loaders Machine Systems Tilt Link - Remove
966H and 972H Wheel Loaders Machine Systems Tilt Link - Install
2005/04/18 Replacement of the Transmission Control Group for Earlier Models Is Updated {3065}