Bucket - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 6S-6224     | 电动液压泵     | 1     |
6V-3175 | 油缸总成     | 1     | |
4C-9634 | 螺杆     | 1     | |
9U-6832 | 螺母     | 1     | |
6V-4035 | 套筒     | 1     |
开始:
- 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。
- 将铲斗水平安置到地面上。
- 将适当的起吊设备连接到铲斗倾斜连杆 (1) 。 铲斗倾斜连杆 (1) 的重量约为 64 kg (140 lb) 。
Show/hide table
图 1 | g00391837 |
- 将螺栓 (2) 、垫圈和垫片从销组件 (3) 上拆下。
- 使用工具 (A) 以拆下销组件 (3) 。
Show/hide table
图 2 | g00391840 |
- 将螺栓 (4) 、垫圈和垫片从销组件 (5) 上拆下。
Show/hide table
图 3 | g00393015 |
- 拆下销组件 (5) 。
- 重复步骤5和6以便从铲斗的另一侧卸下销组件。
- 利用适当的起吊设备将铲斗 (6) 从机器上拆下。 铲斗 (6) 的重量约为 2020 kg (4450 lb)。
Show/hide table
图 4 | g00342997 |
Caterpillar Information System:
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Hydraulic Tank
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Radiator Module - Install
525C, 535C and 545C Wheel Skidders Grapple Grapple Frame
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Install
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Remove
3516B Off-Highway Trucks Factory Passwords Worksheet
2005/03/21 Correction to Testing and Adjusting , "Torque Converter Stall and Implement Pump Double Stall - Test" {3101, 5055, 5084}
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Assemble
3500B Series II Marine Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060} Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
966H and 972H Wheel Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Install
966H and 972H Wheel Loaders Machine Systems Bucket - Install
966H and 972H Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
966H and 972H Wheel Loaders Machine Systems Tilt Link - Remove
966H and 972H Wheel Loaders Machine Systems Tilt Link - Install
2005/04/18 Replacement of the Transmission Control Group for Earlier Models Is Updated {3065}
657G Wheel Tractor-Scraper Circuit Breakers - Reset
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Piston Pump (Implement, Steering, Brake)
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Water Pump - Remove and Install
G3304B and G3306B Engines Electric Starting System - Test
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C7 Engines for Caterpillar Built Machines Electric Starting Motor