Radiator Module - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 6V-3145 | Load Leveling Beam | 1 |
B | 189-0409 | Shackle As | 2 |
- Attach Tooling (A), Tooling (B), and a suitable lifting device to radiator module (26) and position radiator module (26). The weight of radiator module (26) is approximately
345 kg (760 lb) . - Install bolts (27). Repeat for the opposite side.
Show/hide table
Illustration 3 g01154228 - Connect hoses (22). Connect hose assembly (23).
- Connect brackets (25) to tank assembly (24).
Show/hide table
Illustration 4 g01154213 - Connect hose assemblies (18) and (21). Connect hoses (19) and (20).
Show/hide table
Illustration 5 g01154079 - Position bracket (17) and install bolts (16).
Show/hide table
Illustration 6 g01153906 - Position tank assembly (15) and install bolts (14). Connect harness assemblies (13).
- Position cylinder assembly (10) and install bolt (12). Tighten clamp (11).
- Install all mounting hardware on hoses (9).
Show/hide table
Illustration 7 g01153829 - Position refrigerant condenser (8) and install bolts (7).
Show/hide table
Illustration 8 g01153580 - Attach a suitable lifting device to hydraulic oil cooler (5). The weight of hydraulic oil cooler (5) is approximately
27 kg (60 lb) . - Position hydraulic oil cooler (5) and install bolts (6).
Show/hide table
Illustration 9 g01153568 - Install grill assembly (4).
Show/hide table
Illustration 10 g01153561 - Attach a suitable lifting device to fan assembly (1). The weight of fan assembly (1) is approximately
27 kg (60 lb) . - Position fan assembly (1) in shroud assembly (3). Install bolts (2).
- Refill the cooling system. Refer to Operation and maintenance Manual, "Cooling System Coolant (ELC) - Change ".
Show/hide table
Illustration 1 | g01154348 |
Show/hide table
Illustration 2 | g01154375 |
End By:
- Install the fan guards. Refer to Disassembly and Assembly, "Fan Guards - Remove and Install".
- Install the front hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Grapple Grapple Frame
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Install
966H and 972H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Remove
3516B Off-Highway Trucks Factory Passwords Worksheet
2005/03/21 Correction to Testing and Adjusting , "Torque Converter Stall and Implement Pump Double Stall - Test" {3101, 5055, 5084}
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Assemble
3500B Series II Marine Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060} Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
966H and 972H Wheel Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Install
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Remove
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Disassemble
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Hydraulic Tank
966H and 972H Wheel Loaders Machine Systems Bucket - Remove
966H and 972H Wheel Loaders Machine Systems Bucket - Install
966H and 972H Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
966H and 972H Wheel Loaders Machine Systems Tilt Link - Remove
966H and 972H Wheel Loaders Machine Systems Tilt Link - Install
2005/04/18 Replacement of the Transmission Control Group for Earlier Models Is Updated {3065}
657G Wheel Tractor-Scraper Circuit Breakers - Reset
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Piston Pump (Implement, Steering, Brake)
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Water Pump - Remove and Install
G3304B and G3306B Engines Electric Starting System - Test
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor