Flywheel
Show/hide table
Illustration 1 | g01154214 |
Note: Do not use a torch in order to heat the flywheel gear.
(2) Maximum temperature for heating the flywheel gear during installation onto the flywheel (1) ...
Note: Replace the 12 bolts (3) at time of service. Before assembly, lubricate the threads of the bolts with 6V-4876 Lubricant.
Use the following procedure to tighten the bolts:
- Tighten the bolts in a crisscross pattern to a torque of
100 ± 5 N·m (75 ± 4 lb ft) . - Tighten the bolts to an additional 180 ± 5 degrees.
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Crankshaft - Install
C7 Engines for Caterpillar Built Machines Crankshaft - Remove
525C, 535C and 545C Wheel Skidders Grapple Check Valve (Pilot)
966H and 972H Wheel Loaders Engine Supplement Engine Compartment Shield - Remove and Install
966H and 972H Wheel Loaders Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
966H and 972H Wheel Loaders Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
966H and 972H Wheel Loaders Engine Supplement Aftercooler Core - Remove and Install
C9 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install
AD30 Underground Articulated Truck Power Train Electronic Control General Information
AD55 Underground Articulated Truck Power Train Final Drive Spindle, Service and Parking Brake - Assemble
AD45B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always Off
AD30 Underground Articulated Truck Power Train Electronic Control Electronic Control Module (Power Train/Chassis)
525C, 535C and 545C Wheel Skidders Grapple Pressure Sensor (Grapple Oil)
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Remove
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Disassemble
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Remove
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Install
966H and 972H Wheel Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060} Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
3500B Series II Marine Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Assemble
2005/03/21 Correction to Testing and Adjusting , "Torque Converter Stall and Implement Pump Double Stall - Test" {3101, 5055, 5084}
3516B Off-Highway Trucks Factory Passwords Worksheet