Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
| B | 6V-3009 | 横杆 | 1 |
开始:
- 拆下发动机室护罩。 请参阅拆解和组装, "发动机室护罩 - 拆卸和安装"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
- 从风扇组件的两侧拆下螺栓 (1) 和撑杆 (2) 。
Show/hide table
 | |
| 图 1 | g01154231 |
- 拆下夹子 (3) 。
Show/hide table
 | |
| 图 2 | g01154232 |
- 断开软管 (4) 。
Show/hide table
 | |
| 图 3 | g01154233 |
- 卸下螺栓 (5) 。
- 拆下螺栓 (7) 和散热器上水箱 (6) 。
Show/hide table
 | |
| 图 4 | g01154236 |
- 拆下软管 (8) 。
Show/hide table
 | |
| 图 5 | g01154237 |
- 将工具 (A) 和适当的起吊设备连接到风扇组件 (9) 。
Show/hide table
 | |
| 图 6 | g01154238 |
- 从风扇组件 (9) 的两侧拆下螺栓 (10) 和 (11) 。
Show/hide table
 | |
| 图 7 | g01154239 |
- 使用适当的起吊设备拆下风扇组件 (9) 。 风扇组件 (9) 的重量约为 102 kg (225 lb)。 将风扇组件 (9) 安置到适当的栅条上。
- 卸下螺栓 (12) 和防护罩 (13) 。
Show/hide table
 | |
| 图 8 | g01154241 |
- 拆下螺栓 (14) 和 (15) 。
Show/hide table
 | |
| 图 9 | g01154242 |
- 拆下螺栓 (16) 和风扇 (17) 。
Show/hide table
 | |
| 图 10 | g01154244 |
- 拆下轮毂 (18) 。
Show/hide table
 | |
| 图 11 | g01154245 |
- 拆下螺母 (19) 。
Show/hide table
 | |
| 图 12 | g01154246 |
- 使用工具 (B) 拆下轮毂 (21) 。
Show/hide table
 | |
| 图 13 | g01154247 |
- 拆下螺栓 (20) 和护罩 (22) 。
- 拆下螺栓 (24) 和风扇马达 (23) 。
Show/hide table
 | |
| 图 14 | g01154248 |
Caterpillar Information System:
966H and 972H Wheel Loaders Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
966H and 972H Wheel Loaders Engine Supplement Aftercooler Core - Remove and Install
C9 Engines for Caterpillar Built Machines Cylinder Block Cover - Remove and Install
AD30 Underground Articulated Truck Power Train Electronic Control General Information
AD55 Underground Articulated Truck Power Train Final Drive Spindle, Service and Parking Brake - Assemble
AD45B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always Off
AD30 Underground Articulated Truck Power Train Electronic Control Electronic Control Module (Power Train/Chassis)
AD45B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always On
904B Wheel Loader Power Train Hydrostatic System - Flush and Fill
525C, 535C and 545C Wheel Skidders Grapple Hydraulic Rotator
525C, 535C and 545C Wheel Skidders Grapple Grapple Head
904B Wheel Loader Power Train Machine Preparation for Testing and Adjusting
966H and 972H Wheel Loaders Engine Supplement Engine Compartment Shield - Remove and Install
525C, 535C and 545C Wheel Skidders Grapple Check Valve (Pilot)
C7 Engines for Caterpillar Built Machines Crankshaft - Remove
C7 Engines for Caterpillar Built Machines Crankshaft - Install
C27 and C32 Tier 4 Engines Flywheel
525C, 535C and 545C Wheel Skidders Grapple Pressure Sensor (Grapple Oil)
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Remove
966H and 972H Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Disassemble
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Remove
966H and 972H Wheel Loaders Engine Supplement Electric Starting Motor - Install
966H and 972H Wheel Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install