Lubrication Decals (Films) Are No Longer Used On Machines{7557}
Usage:
Caterpillar Machines
Lubrication and maintenance decals (films) are no longer used on Caterpillar machines. All the information that was on these decals is in the appropriate Operation and/or Maintenance Guides. These guides are now permanently attached to the literature compartment on the machine. The guides should be used whenever any lubrication or maintenance information is needed.
Caterpillar Information System:
1984/12/10 New Pressure Gauges Have Dual Scales [kPa (psi)]{0600}
1984/12/10 Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/11/26 New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26 Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26 Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers{1000}
1984/11/26 Rear Power Take-Off Clutch Can Use Nonmetallic Plates And Grease Lubrication For Main Bearings{3055,3305}
1984/11/26 Causes And Correction Of Opposite Crankshaft Rotation In Direct Injection Engines{1000}
1984/11/19 Remanufactured Piece Parts Now Available For Turbochargers (U.S. and Canada Only){1052,1053,1056,1065,1077}
1984/11/19 Fuel Setting And Related Information Microfiche Corrected, Improved{0374,0375}
1984/11/19 Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19 Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19 Use Care When Installing Circuit Boards In Regulators{4467}
1984/12/10 Starters That Remain Engaged After Engine Is Running{1453}
1984/12/10 New 76.6°C (170°F) Water Temperature Regulators Used In Inlet Controlled Cooling Systems{1355,1350}
1984/12/10 New Air Pipe Retainers Used To Connect Turbocharger To Aftercooler{1052,1063}
1984/12/10 Improved BrakeSaver Seals Available{1155}
1984/12/10 A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10 New Seal Used In Alternator Mounting Group{1405,1400}
1984/12/10 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10 Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10 Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10 Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1985/01/14 Minimize Fuel Problems In Cold Weather Operation {1280,1250}
1985/01/14 New And Improved Gaskets In Front Housing Group And Accessory Drive Group {1151,1150}