New Continuity Testing Light Available{0600,0785}
Usage:
The new 8T500 Continuity Testing Light replaces the former 8S4627 Circuit Continuity Tester which is canceled. The new continuity testing light is designed for rugged field use. The light comes with batteries and instruction decals. The decals are in seven different languages, including English, Arabic, Spanish, German, French, Portuguese and Italian.
The 8T500 Continuity Testing Light can be used to test non-energized circuits. The lamp will come on brightly when connected across a low resistance circuit. No light will appear if the resistance of the circuit exceeds 10 Ohms.
8T500 Continuity Testing Light.
Caterpillar Information System:
1984/10/15 New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15 Seal Kits Available For Hydraulic Cylinders{5050}
1984/10/08 Deflection Of Flywheel Housings Should Be Controlled During Transportation{1157}
1984/10/08 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter{0776,0785}
1984/10/08 Wiring Changed On Voltage Regulators{4467}
1984/10/08 Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}
1984/10/08 Make Sure There Is Clearance Between The Propeller Shaft Fastener And The Transmission Output Flange{3305}
1984/10/01 Improved Oil Separator Elements Have Longer Service Life{1317,1202,1161}
1984/10/01 Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01 New Cylinder Block Groups Used{1201}
1984/10/01 New Gaskets Give A Better Seal To Watercooled Exhaust Manifolds{1059}
1984/10/01 Pressure - Force Conversion Decals Available{0617}
1984/10/15 New Water Temperature Regulator Has Higher Temperature Setting{1355}
1984/10/15 New Indicator Lamps Used On Generator Control Panels{7002}
1984/10/22 New Heat Exchanger Group Has More Cooling Capacity{1379}
1984/10/22 Improvements Made To Fuel Filter Housing{1260,1261,1262}
1984/10/22 Changes To Water Lines Group Increase Coolant Flow Through Exhaust Manifold{1059}
1984/10/22 Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/29 Cetane Injection Group Uses New Orifice, Tee and Seals{1250,1274}
1984/10/29 Foil Shield Will Help Prevent Electrical Interference In Engine Set Point Indicator{0781,0785}
1984/10/29 New Oil Filter Group Can Be Used To Extend Oil Change Interval{1306,1318,1326}
1984/10/29 New Cylinder Head Gasket Helps Prevent Oil Leakage Around Gear Pocket{1101}
1984/10/29 New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}