Pressure - Force Conversion Decals Available{0617}
Usage:
Decals are available to give a direct conversion from kilopascals (kPa) or pounds per square inch (psi) to force in U.S. tons. The decal also gives the formula for calculating the force in kilonewtons (kN). A decal is available for each cylinder in the Caterpillar Tool Guide. The chart gives the form number of the decal for each cylinder part number. Each decal has a form number and can be ordered as a regular literature item. Each decal lists the cylinder part numbers it can be used on and gives the piston area of the cylinder in square meters (m2). The decal has an adhesive back so that it can be attached to the cylinder.
Caterpillar Information System:
1984/10/01 New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01 Tool Drawings Available For Testing Altronic Magnetos On 2P2340 Magneto Test Bench{0709,0712,0767}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/09/17 New Fittings Used In Fuel Filter Lines Group{1274}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 New Service Tools Available{0600}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1306,1318}
1984/09/03 Change To Maintenance Interval For Valve Lash Adjustment{1105,1102}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/10/01 New Gaskets Give A Better Seal To Watercooled Exhaust Manifolds{1059}
1984/10/01 New Cylinder Block Groups Used{1201}
1984/10/01 Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01 Improved Oil Separator Elements Have Longer Service Life{1317,1202,1161}
1984/10/08 Make Sure There Is Clearance Between The Propeller Shaft Fastener And The Transmission Output Flange{3305}
1984/10/08 Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}
1984/10/08 Wiring Changed On Voltage Regulators{4467}
1984/10/08 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter{0776,0785}
1984/10/08 Deflection Of Flywheel Housings Should Be Controlled During Transportation{1157}
1984/10/15 Seal Kits Available For Hydraulic Cylinders{5050}
1984/10/15 New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15 New Continuity Testing Light Available{0600,0785}