New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
Usage:
The gauge in the 1P545 (Tire) Gauge Group now has dual scales. The pounds per square inch (psi) scale is on the outside of the dial face and kilopascal (kPa) scale is on the inside of the dial face. Also, there is a yellow band that denotes the kPa scale. Only the dial face has been changed to eliminate the need for converting kPa to psi.
The new tire gauge groups are available through the Caterpillar Parts Department.
Caterpillar Information System:
1984/09/17 New Service Tools Available{0600}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1306,1318}
1984/09/03 Change To Maintenance Interval For Valve Lash Adjustment{1105,1102}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/09/03 Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}
1984/09/03 New Transfer Gears Have Better Contact And Alignment{3301}
1984/09/03 Rubber Bumpers Limit Movement Of Control Panel{7421,7002}
1984/09/03 New Oil Pan And Brace Assemblies, Coarse Thread Bolts Used Instead Of Fine Thread Bolts{1302,0683}
1984/09/03 New Crankshaft Seal Groups Available{1202}
1984/09/03 New Inlet Valve Used{1105}
1984/09/17 New Fittings Used In Fuel Filter Lines Group{1274}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01 Tool Drawings Available For Testing Altronic Magnetos On 2P2340 Magneto Test Bench{0709,0712,0767}
1984/10/01 New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01 Pressure - Force Conversion Decals Available{0617}
1984/10/01 New Gaskets Give A Better Seal To Watercooled Exhaust Manifolds{1059}
1984/10/01 New Cylinder Block Groups Used{1201}
1984/10/01 Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01 Improved Oil Separator Elements Have Longer Service Life{1317,1202,1161}
1984/10/08 Make Sure There Is Clearance Between The Propeller Shaft Fastener And The Transmission Output Flange{3305}
1984/10/08 Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}