Crankcase Breather
Show/hide table
| |
| Illustration 1 | g01162185 |
|
(1) Crankcase breather
(2) Valve (3) Adapter | |
Apply 9S-3263 Thread Lock Compound to the threads of adapter (3) prior to assembly. Tighten the adapter into the side of the oil pan. Refer to Illustration 2.
Show/hide table
| |
| Illustration 2 | g01162191 |
|
(4) Cylinder block
(5) Oil pan | |
Caterpillar Information System:
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
C4.4 (Mech) Marine Generator Set MCS-3 Water Lines - Engines with a Keel Cooler
C32 Petroleum Engines Model View Illustrations
C4.4 Marine Generator Set Engines Flywheel - Install
C4.4 Marine Generator Set Engines Flywheel - Remove
G3400 Engines (EIS) Inspecting Electrical Connectors
C4.4 Marine Generator Set Engines Water Temperature Regulator - Remove and Install
C4.4 Industrial Engine Turbocharger - Inspect
C4.4 Marine Auxiliary Generator Set Engine Water Lines - Engines with a Heat Exchanger
C4.4 Marine Generator Set Engines Water Pump - Remove and Install
C4.4 Marine Auxiliary Generator Set Engine Fuel Filter (Primary)
C6.6 Industrial Engine Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Water Connection Group
C7.1 (Mech) Industrial Engine Water Pump - Inspect
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C2.2 Engine and C1.5 Generator Set Engine Design
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Rocker Shaft