Lifter Group
Show/hide table
Illustration 1 | g00692979 |
Clearance between the lifter and the bore in the engine for the lifter
- Standard maximum clearance ...
0.058 mm (0.0023 inch) - Repair limit ...
0.080 mm (0.0031 inch) - Repair limit ...
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C2.2 Engine and C1.5 Generator Set Engine Design
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C7.1 (Mech) Industrial Engine Water Pump - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Water Connection Group
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines
C4.4 Marine Auxiliary Generator Set Engine Crankcase Breather
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Camshaft
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Block
C2.2 Engine and C1.5 Generator Set Crankshaft