Camshaft
Show/hide table
Illustration 1 | g00819857 |
(1) Camshaft lobe for the inlet and exhaust valves
- Height of the camshaft lobe for the inlet and exhaust valves ...
34.065 to 34.120 mm (1.3411 to 1.3433 inch)
- Service limit ...
33.7 mm (1.3270 inch)
(2) Camshaft lobe for the fuel injection pump
- Height of the camshaft lobe for the fuel injection pump ...
41.940 to 42.060 mm (1.6512 to 1.6559 inch)
- Service limit ...
41.8 mm (1.6450 inch)
(3) Camshaft lobe for the fuel transfer pump
- Height of the camshaft lobe for the fuel transfer pump ...
31.900 to 32.000 mm (1.2559 to 1.2598 inch)
- Service limit ...
30.0 mm (1.1810 inch)
Show/hide table
Illustration 2 | g00295323 |
(A) Actual camshaft lobe lift
(B) Height of the camshaft lobe
(C) Base circle
To determine the lobe lift, use the procedure that follows:
- Measure the height of the camshaft lobe (B).
- Measure the base circle (C).
- Subtract the base circle that is found in Step 2 from the height of the camshaft lobe that is found in Step 1. The difference is the actual camshaft lobe lift.
Show/hide table
Illustration 3 | g00819901 |
(4) Tighten the setscrews for the retainer plate for the camshaft to the following torque. ...
(5) Retainer plate for the camshaft
(6) Camshaft gear
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Lifter Group
C2.2 Engine and C1.5 Generator Set Fuel Injection Nozzles
C2.2 Engine and C1.5 Generator Set Fuel Injection Pump
C6.6 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C2.2 Engine and C1.5 Generator Set Fuel Injection Lines
C2.2 Engine and C1.5 Generator Set Engine Design
C7.1-XQ200 Rental Generator Set Engine Crankcase Breather Element - Replace
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Block
C2.2 Engine and C1.5 Generator Set Crankshaft
C2.2 Engine and C1.5 Generator Set Connecting Rod Bearing Journal
C2.2 Engine and C1.5 Generator Set Main Bearing Journal
C2.2 Engine and C1.5 Generator Set Engine Design
C2.2 Engine and C1.5 Generator Set Connecting Rod
C9 Generator Set Self-Diagnostics - If Equipped with EMCP 3
C2.2 Engine and C1.5 Generator Set Piston and Rings