Connecting Rod Bearing Journal
Show/hide table
Diameter of the Connecting Rod Bearing Journals     | ||
---|---|---|
Journals     | Diameter     | Service limit     |
Standard     | 51.964 to 51.975 mm (2.04582 to 2.04626 inch)     |
51.90 mm (2.0433 inch)     |
Undersize 0.25 mm (0.010 inch)     |
51.714 to 51.725 mm (2.03598 to 2.03641 inch)     |
51.65 mm (2.0335 inch)     |
Undersize 0.50 mm (0.020 inch)     |
51.464 to 51.475 mm (2.02614 to 2.02660 inch)     |
51.40 mm (2.0236 inch) (1)     |
Show/hide table
( 1 ) | If the diameter of the connecting rod bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced. |
Clearance between the connecting rod bearing and the connecting rod bearing journal
-
Standard clearance
- C1.5 (Journals 1 and 2) ... 0.035 to 0.085 mm (0.00138 to 0.00335 inch)
- C1.5 (Journal 3) ... 0.039 to 0.092 mm (0.00150 to 0.00360 inch)
- C2.2 ... 0.035 to 0.085 mm (0.00138 to 0.00335 inch)
- Service limit (all models) ... 0.20 mm (0.0079 inch)
Caterpillar Information System:
C2.2 Engine and C1.5 Generator Set Crankshaft
C2.2 Engine and C1.5 Generator Set Cylinder Block
C7 On-highway Engine Cylinder Head
C2.2 Engine and C1.5 Generator Set Water Temperature Regulator
C2.2 Engine and C1.5 Generator Set Engine Oil Relief Valve
C4.4 Marine Auxiliary Generator Set Engine Heater Mounting Group - If Equipped
C2.2 Engine and C1.5 Generator Set Camshaft
C2.2 Engine and C1.5 Generator Set Exhaust Manifold
C2.2 Engine and C1.5 Generator Set Cylinder Head
C2.2 Engine and C1.5 Generator Set Cylinder Head Valves
C2.2 Engine and C1.5 Generator Set Valve Mechanism Cover
C2.2 Engine and C1.5 Generator Set Rocker Shaft
C2.2 Engine and C1.5 Generator Set Main Bearing Journal
C2.2 Engine and C1.5 Generator Set Engine Design
C2.2 Engine and C1.5 Generator Set Connecting Rod
C9 Generator Set Self-Diagnostics - If Equipped with EMCP 3
C2.2 Engine and C1.5 Generator Set Piston and Rings
C2.2 Engine and C1.5 Generator Set General Information
C2.2 Engine and C1.5 Generator Set Gear Group (Front)
3500 Engines Crankcase Pressure (High)
3500 Engines Coolant Temperature Is Too Low
3500 Engines Engine Overspeed
C15 and C18 Petroleum Generator Sets Starting the Engine - EMCP 3
C32 Petroleum Engines Plate Locations and Film Locations