Fuel Filter (Primary)
Show/hide table
Illustration 1 | g01161998 |
(1) Fuel filter base (2) Connector (3) Fuel filter |
Apply 9S-3263 Thread Lock Compound to the threads of connector (2) prior to tightening the connector into fuel filter base (1). Ensure that the connector is secured in the horizontal position after tightening.
(2) Tighten the connector to the following torque. ... 10 N·m (89 lb in)
Caterpillar Information System:
C6.6 Industrial Engine Fuel System Secondary Filter - Replace
C6.6 Industrial Engine Fuel System - Prime
3500B and 3500C Generator Set Engines Digital Sensor Supply
C280 Marine and Petroleum Engines Pistons, Rings and Connecting Rods
C3.3 and C4.4 Generator Sets Engine Oil Pump - Install
C3.3 and C4.4 Generator Sets Engine Oil Pump - Remove
Dynamometer Testing of Caterpillar Engines {0781, 1000} Dynamometer Testing of Caterpillar Engines {0781, 1000}
C9 Generator Set Engines Air Inlet and Exhaust System
3500B and 3500C Generator Set Engines Cat Data Link
C6.6 Industrial Engine Engine Oil and Filter - Change
C280 Marine and Petroleum Engines Lubrication System Operation
325D and 329D Excavators Cab Door
C4.4 Marine Generator Set Engines Water Pump - Remove and Install
C4.4 Marine Auxiliary Generator Set Engine Water Lines - Engines with a Heat Exchanger
C4.4 Industrial Engine Turbocharger - Inspect
C4.4 Marine Generator Set Engines Water Temperature Regulator - Remove and Install
G3400 Engines (EIS) Inspecting Electrical Connectors
C4.4 Marine Generator Set Engines Flywheel - Remove
C4.4 Marine Generator Set Engines Flywheel - Install
C32 Petroleum Engines Model View Illustrations
C4.4 (Mech) Marine Generator Set MCS-3 Water Lines - Engines with a Keel Cooler
C4.4 (Mech) Marine Generator Set MCS-3 Exhaust Elbow
C4.4 Marine Auxiliary Generator Set Engine Crankcase Breather
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Lines