Engine Oil Filter Base - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 185-3630 | 带式扳手组件 | 1 |
开始:
- 拆下机油冷却器。 请参阅拆解和组装, "发动机机油冷却器 - 拆卸"。
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 拆下发动机机油滤清器 (6)。
- 断开软管组件 (2)。
- 拆下螺栓 (1) 和螺栓 (5)。
- 拆下发动机机油滤清器底座 (3)。 从发动机机油滤清器底座上拆下 O 形密封圈 (4) 。
Show/hide table
| |
| 图 1 | g01092780 |
Caterpillar Information System:
G3612 and G3616 Engines Safety Messages
C15 and C18 Industrial Engines Electric Starting Motor - Remove and Install
3500B and 3500C Marine Engines Turbocharger Inlet Pressure Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankcase Pressure Sensor
3500 and 3500B Engines Electrical System
C15 and C18 Industrial Engines Alternator - Remove and Install
G3500 Generator Sets Cooling System Coolant (NGEC) - Change
C13, C15, and C18 Generator Set Engines Speed Control (Switch) - Test
C15 and C18 Industrial Engines Camshaft - Remove
C15 and C18 Industrial Engines Camshaft - Install
G3500 Engines Starting the Engine
C18 Generator set and C18 Marine Engines Flywheel - Install
C15 and C18 Industrial Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Pump - Remove
3412E, C30 and C32 Marine Engines Engine Oil Pump - Disassemble
C15 and C18 Industrial Engines Engine Oil Cooler - Remove
C15 and C18 Industrial Engines Engine Oil Cooler - Install
2004/08/01 A New Exhaust Seal is Used {1059}
C15 and C18 Industrial Engines Water Pump - Remove
C15 and C18 Industrial Engines Water Pump - Install
3412E, C30 and C32 Marine Engines Engine Oil Pump - Assemble
3508B, 3512B, and 3516B High Displacement Generator Sets Walk-Around Inspection
3508B Industrial Engines Engine Oil Temperature Sensor
3412E, C30 and C32 Marine Engines Engine Oil Pump - Install