Engine Oil Temperature Sensor
Show/hide table
图 1 | g01093031 |
(1) 端口接头
- 扭矩 ... 48 ± 5 N·m (35 ± 4 lb ft)
测量范围 ... −40 至 150°C (−40 至 302 °F)
输入供电电压 ... 5 ± 0.25 VDC
最大输出电流 ... 10 mA
输出电压(信号) ... 0.3 至 4.9 V
Caterpillar Information System:
3508B, 3512B, and 3516B High Displacement Generator Sets Walk-Around Inspection
3412E, C30 and C32 Marine Engines Engine Oil Pump - Assemble
C15 and C18 Industrial Engines Water Pump - Install
C15 and C18 Industrial Engines Water Pump - Remove
2004/08/01 A New Exhaust Seal is Used {1059}
C15 and C18 Industrial Engines Engine Oil Cooler - Install
C15 and C18 Industrial Engines Engine Oil Cooler - Remove
3412E, C30 and C32 Marine Engines Engine Oil Pump - Disassemble
3412E, C30 and C32 Marine Engines Engine Oil Pump - Remove
C15 and C18 Industrial Engines Engine Oil Filter Base - Install
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove
G3612 and G3616 Engines Safety Messages
3412E, C30 and C32 Marine Engines Engine Oil Pump - Install
2004/08/01 An Improved Injection Actuation Pressure Sensor Is Now Used {1925}
3500 Engines for Caterpillar Built Generator Sets Prelube Pressure Switch
EMCP3 Component Location
EMCP3 Digital Input Programming
EMCP3 Spare Analog Input Programming
2004/08/01 An Improved Injection Actuation Pressure Sensor Is Now Used {1925}
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
Installation of the Uninterruptible Power Supply (Single-Module System){4480} Installation of the Uninterruptible Power Supply (Single-Module System){4480}
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install