Air Inlet Heater Solenoid - Remove and Install
Removal Procedure
- Disconnect harness assemblies (1) and harness assemblies (2) .
Show/hide table
 | |
| Illustration 1 | g01087940 |
- Remove nuts (3) and remove air inlet heater solenoid (4) .
Installation Procedure
- Position air inlet heater solenoid (4) and install nuts (3) .
Show/hide table
| | |
| Illustration 2 | g01087940 |
- Connect harness assemblies (2) . Tighten the nuts to a torque of 9 ± 1 N·m (80 ± 9 lb in).
- Connect harness assemblies (1) . Tighten the nuts to a torque of 2.25 ± 0.25 N·m (20 ± 2 lb in).
Caterpillar Information System:
C7 Marine Engines Air Inlet Heater - Remove and Install
2004/08/01 An Improved Unit Injector Hydraulic Pump Group is Now Available. {1714}
C15 On-highway Engines Air Compressor - Remove and Install
C15 On-highway Engines Engine Oil Pan - Remove and Install
G3500 Engines Refill Capacities and Recommendations
C7 Marine Engines Exhaust Manifold - Remove and Install
C15 On-highway Engines Valve Mechanism Cover Base - Remove and Install
C7 Marine Engines Turbocharger - Install
C7 Marine Engines Turbocharger - Remove
C7 Marine Engines Unit Injector Hydraulic Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
C7 Marine Engines Inlet and Exhaust Valves - Remove and Install
G3500B Engines Gas Engine Ignition
C7 Marine Engines Engine Oil Filter Base - Remove
Generator Set Start Module (AC Input) General Hazard Information
C7 Marine Engines Engine Oil Filter Base - Disassemble
C7 Marine Engines Engine Oil Filter Base - Assemble
C7 Marine Engines Engine Oil Filter Base - Install
C7 Urban Transit Bus Engines Gauges and Indicators
C7 Marine Engines Engine Oil Cooler - Remove
C7 Marine Engines Engine Oil Cooler - Install
2004/12/13 New Software is Now Used to Ensure Charging at Low Engine Speed {7620}
C7 Urban Transit Bus Engines Engine Operation