General Hazard Information
Attach a "Do Not Operate" warning tag or a similar warning tag to the keyswitch or to the controls before the system is serviced or before the system is repaired. These warning tags are available from your Caterpillar dealer. Attach the warning tags to the system and to each operator control station.
Show/hide table
Illustration 1 | g00104545 |
Do not allow unauthorized personnel on the system, or around the system when the system is being serviced.
Speeds, temperatures, and load are the best indicators of performance. Rely on instrumentation. Record all readings. Compare these readings with previous readings in order to detect developing abnormalities.
- Wear a hard hat, protective glasses, and other protective equipment, as required.
- Do not wear loose clothing or jewelry that can snag on controls or on other parts of the system.
- Ensure that all protective guards and all covers are secured in place on the system.
- Never put maintenance fluids into glass containers. Glass containers can break.
- Use all cleaning solutions with care.
- Report all necessary repairs.
Unless other instructions are provided, perform the maintenance under the following conditions:
- The system is stopped and the system is disconnected from power. Ensure that the system cannot be powered or ensure that power cannot be applied to the system.
- Do not attempt any repairs that are not understood. Use the proper tools. Replace any equipment that is damaged or repair the equipment.
- Remove all tools, electrical cords, and any other loose items from the system before starting the system.
Caterpillar Information System:
C7 Marine Engines Engine Oil Filter Base - Remove
G3500B Engines Gas Engine Ignition
C7 Marine Engines Inlet and Exhaust Valves - Remove and Install
C7 Marine Engines Air Inlet Heater Solenoid - Remove and Install
C7 Marine Engines Air Inlet Heater - Remove and Install
2004/08/01 An Improved Unit Injector Hydraulic Pump Group is Now Available. {1714}
C15 On-highway Engines Air Compressor - Remove and Install
C15 On-highway Engines Engine Oil Pan - Remove and Install
G3500 Engines Refill Capacities and Recommendations
C7 Marine Engines Exhaust Manifold - Remove and Install
C15 On-highway Engines Valve Mechanism Cover Base - Remove and Install
C7 Marine Engines Turbocharger - Install
C7 Marine Engines Engine Oil Filter Base - Disassemble
C7 Marine Engines Engine Oil Filter Base - Assemble
C7 Marine Engines Engine Oil Filter Base - Install
C7 Urban Transit Bus Engines Gauges and Indicators
C7 Marine Engines Engine Oil Cooler - Remove
C7 Marine Engines Engine Oil Cooler - Install
2004/12/13 New Software is Now Used to Ensure Charging at Low Engine Speed {7620}
C7 Urban Transit Bus Engines Engine Operation
G3500 Engines Maintenance Interval Schedule - Naturally Aspirated
G3500 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
C7 Marine Engines Water Pump - Remove
C15 On-highway Engine Engine Oil Filter Base - Disassemble