C7 Marine Engines Caterpillar


Engine Oil Filter Base - Install

Usage:

C7 C7B

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench Assembly     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01081055

  1. Position the gasket and engine oil filter base (4) on the cylinder block. Install bolts (3) that hold engine oil filter base (4) to the cylinder block. Tighten bolts (3) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).

  1. Connect tube assemblies (2) to engine oil filter base (4) .

  1. Use Tooling (A) to install oil filter (1) .
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.