Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) to remove oil filter (1) .
Show/hide table
Illustration 1 | g01081055 |
- Disconnect tube assemblies (2) from engine oil filter base (4) .
- Remove bolts (3) . Remove engine oil filter base (4) .
Caterpillar Information System:
G3500B Engines Gas Engine Ignition
C7 Marine Engines Inlet and Exhaust Valves - Remove and Install
C7 Marine Engines Air Inlet Heater Solenoid - Remove and Install
C7 Marine Engines Air Inlet Heater - Remove and Install
2004/08/01 An Improved Unit Injector Hydraulic Pump Group is Now Available. {1714}
C15 On-highway Engines Air Compressor - Remove and Install
C15 On-highway Engines Engine Oil Pan - Remove and Install
G3500 Engines Refill Capacities and Recommendations
C7 Marine Engines Exhaust Manifold - Remove and Install
C15 On-highway Engines Valve Mechanism Cover Base - Remove and Install
C7 Marine Engines Turbocharger - Install
C7 Marine Engines Turbocharger - Remove
Generator Set Start Module (AC Input) General Hazard Information
C7 Marine Engines Engine Oil Filter Base - Disassemble
C7 Marine Engines Engine Oil Filter Base - Assemble
C7 Marine Engines Engine Oil Filter Base - Install
C7 Urban Transit Bus Engines Gauges and Indicators
C7 Marine Engines Engine Oil Cooler - Remove
C7 Marine Engines Engine Oil Cooler - Install
2004/12/13 New Software is Now Used to Ensure Charging at Low Engine Speed {7620}
C7 Urban Transit Bus Engines Engine Operation
G3500 Engines Maintenance Interval Schedule - Naturally Aspirated
G3500 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
C7 Marine Engines Water Pump - Remove