Transmission Controls (Shift Lever) May Fail Caterpillar


Transmission Controls (Shift Lever) May Fail

Usage:

WHEEL LOADERS

INTEGRATED TOOLCARRIERS

WHEEL TRACTORS

SOIL COMPACTORS

LANDFILL COMPACTORS

BACKHOE LOADERS

924F (4YN, 5NN, 6MN, 7PN),
924G (3DZ, 3PZ, 6YW, 9SW, AAN),
928G (6XR, 7SR),
924Gz (AAB),
938G (4YS, 6WS, 8RS, 9HS),
950G (3JW, 5MW, 5FW, 8JW),
962G (6HW, 4PW, 6EW, 7BW),
966G (3PW, 3SW, 8XW),
972G (4WW, 6AW, 9GW) WHEEL LOADERS;
IT24F (4NN, 6KN),
IT28G (8CR, 9AR),
IT38G (7BS, 1CW),
IT62G (AKP) INTEGRATED TOOLCARRIERS;
814F (9DM) WHEEL TRACTORS;
815F (1GN) SOIL COMPACTOR;
816F (5FN) SOIL COMPACTOR;
416C (1LR, 1WR, 1XR, 4ZN, 5YN),
426C (1CR, 1ER, 1MR, 1NR, 1YR, 1ZR, 6XN, 7WN),
428C (1HR, 2CR, 8RN),
436C (1FR, 1GR, 1PR, 9JN, 1RR, 2AR, 2BR, 8TN),
438C (1JR, 1TR, 2DR, 9KN BACKHOE LOADER)

Problem:

The following transmission controls (shift lever) may experience performance problems:

These transmission controls may experience any of the following failure modes:

- Intermittent operation of the 1-2-3-4 speed function
- Disabling of the speed output (transmission neutralizes)
- Speed output remains in the last valid speed

The problem is limited to certain dates that the shifters were manufactured. There is a six Alpha-character date code on the bottom of the shifter (where the wires exit the unit). The last four characters of the suspect date codes are NRNN, NANN, NLNN, NKNN, NONN, and NDNN.

Solution:

If a shifter problem is suspected, follow the troubleshooting procedure in the appropriate Service Manual. Replace the shifter if necessary. The problem has already been corrected at the shifter manufacturer. Additional service information will be announced as the information becomes available.

COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Seats With Arm Rests Need Spacer Bars When The Seat Suspension Is Replaced Seats With Arm Rests Need Spacer Bars When The Seat Suspension Is Replaced
131-4095 Tube Assembly May Lack Orifices 131-4095 Tube Assembly May Lack Orifices
Field Returns Of Failed Actual Gear Position Sensors On D-Series Small Off-Highway Trucks, Wheel Tractor Scrapers, And Articulated Trucks Are Needed For failure Analysis Field Returns Of Failed Actual Gear Position Sensors On D-Series Small Off-Highway Trucks, Wheel Tractor Scrapers, And Articulated Trucks Are Needed For failure Analysis
Requirements For 111-2427 Clip When Performing PS40125 Requirements For 111-2427 Clip When Performing PS40125
VIMS May Reset When Loader Payload Data Is Downloaded With VIMSpc99 Or Accessed VIA The Loader Payload Menu VIMS May Reset When Loader Payload Data Is Downloaded With VIMSpc99 Or Accessed VIA The Loader Payload Menu
Diagnostic Code CID 0800 FMI 09 May Log Against VIMS At Power Up Diagnostic Code CID 0800 FMI 09 May Log Against VIMS At Power Up
Grapple Chattering When The Grapple Is Lowered At Idle Or At Low Engine Speeds Grapple Chattering When The Grapple Is Lowered At Idle Or At Low Engine Speeds
Test Cell Oil Screen And Oil Filter Test Cell Oil Screen And Oil Filter
Misalignment Between The Engine And The Hydrostatic Pump May Be Caused By Missing Flywheel Housing Dowel Pins Misalignment Between The Engine And The Hydrostatic Pump May Be Caused By Missing Flywheel Housing Dowel Pins
Air Cleaner May Allow Moisture Ingress Air Cleaner May Allow Moisture Ingress
Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump
Modification To The Spacer Plate For The Recoil Spring Modification To The Spacer Plate For The Recoil Spring
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Debris From Manufacturing Operations Debris From Manufacturing Operations
Engine Continues To Run With Key Switch Off Engine Continues To Run With Key Switch Off
Failure Of The Friction Disc For The Joystick Hold Control Failure Of The Friction Disc For The Joystick Hold Control
Sand Blast Grid Sand Blast Grid
A New Battery Clip Is Now Used On The 980G Wheel Loader A New Battery Clip Is Now Used On The 980G Wheel Loader
Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette)) Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette))
Connecting Rod Bearings Connecting Rod Bearings
Bond Failure Of The Transmission Friction Disc Bond Failure Of The Transmission Friction Disc
167-6834 Wire Harness 167-6834 Wire Harness
Hard Lever Effort On Hydraulic Controls Hard Lever Effort On Hydraulic Controls
Track Guide Wear Strips Track Guide Wear Strips
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.