PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED TRANSMISSION OIL TUBE ASSEMBLY ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
Usage:
REBE6100-00
Show/hide table
| 06Jul2010 |
U-239
D-206
O-210
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED TRANSMISSION OIL TUBE ASSEMBLY ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS |
|
| 3154 | PS51861 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51861" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2012 |
PROBLEM
Show/hide table
| Some of the existing Transmission Oil Tube Assemblies can crack on certain AD55B Underground Articulated Trucks. If one of these Transmission Oil Tube Assemblies fail it is necessary to replace it with an improved Tube and Hose Assembly. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| AD55B | JNW00101-00136, 138-181 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 4 | 1P4578 | FLANGE-HALF |
| 2 | 4J0522 | SEAL-O-RING |
| 2 | 4J0524 | SEAL-O-RING |
| 6 | 4J0527 | SEAL-O-RING |
| 1 | 5P1076 | WASHER-HARD |
| 1 | 5P7468 | CLIP |
| 1 | 5P7469 | CLIP |
| 2 | 5P8247 | WASHER-HARD |
| 1 | 6V1874 | GROMMET |
| 2 | 6V7687 | LOCKNUT |
| 8 | 7X0331 | BOLT |
| 2 | 7X0347 | BOLT |
| 8 | 8T4121 | WASHER-HARD |
| 8 | 8T4182 | BOLT-HEX HEAD |
| 1 | 8T4184 | BOLT |
| 9 | 8T4223 | WASHER-HARD |
| 4 | 8T4835 | BOLT |
| 2 | 8T6703 | CLAMP-BAND |
| 38 | 3266983 | SLEEVING (38 cm) |
| 1 | 3511306 | HOSE AS |
| 1 | 3511307 | BRACKET |
| 1 | 3511308 | ELBOW |
| 1 | 3511311 | TUBE AS |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 16% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to Special Instruction REHS5264 for rework procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 10.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim. |
||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 992K WHEEL LOADERS AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN D11T AND D11T CD TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN D11T AND D11T CD TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT HYDRAULIC LOCKOUT SOLENOID VALVE ON CERTAIN 930H, 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOL CARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT HYDRAULIC LOCKOUT SOLENOID VALVE ON CERTAIN 930H, 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING SANTOPRENE COATED TUBE ASSEMBLIES ON C4.4 ENGINES INSTALLED IN CERTAIN D3K, D4K, AND D5K TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING SANTOPRENE COATED TUBE ASSEMBLIES ON C4.4 ENGINES INSTALLED IN CERTAIN D3K, D4K, AND D5K TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 293-6125 TRANSMISSION INPUT GROUP ON CERTAIN AD55B UNDERGROUND TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 293-6125 TRANSMISSION INPUT GROUP ON CERTAIN AD55B UNDERGROUND TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-2646 OR 267-6788 BEARING GEAR GROUP ON CERTAIN 365B L SERIES II, 365B L SERIES II FS, 365B L SERIES II MH, 365C L, 365C L FS, 365C L MH, AND 365C L CIPI EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-2646 OR 267-6788 BEARING GEAR GROUP ON CERTAIN 365B L SERIES II, 365B L SERIES II FS, 365B L SERIES II MH, 365C L, 365C L FS, 365C L MH, AND 365C L CIPI EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING UPDATED EXHAUST GUARDING ON CERTAIN 525C, 535C, AND 545C WHEELED SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSTALLING UPDATED EXHAUST GUARDING ON CERTAIN 525C, 535C, AND 545C WHEELED SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE GREASE LINE THAT SUPPLIES THE E-PIN ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE GREASE LINE THAT SUPPLIES THE E-PIN ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC FAN MOUNTING HARDWARE ON CERTAIN 993K WHEEL LOADERS THAT ARE EQUIPPED WITH THE HIGH AMBIENT COOLING ARRANGEMENT PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC FAN MOUNTING HARDWARE ON CERTAIN 993K WHEEL LOADERS THAT ARE EQUIPPED WITH THE HIGH AMBIENT COOLING ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE GREASE LINE THAT SUPPLIES THE E-PIN ON CERTAIN 950H AND 962H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUTOLUBE GREASE LINE THAT SUPPLIES THE E-PIN ON CERTAIN 950H AND 962H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRACTOR ENGINE MOUNTS ON CERTAIN 631G, 631G OEM, AND 637G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRACTOR ENGINE MOUNTS ON CERTAIN 631G, 631G OEM, AND 637G WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 319-6491 SPEED SENSORS FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 319-6491 SPEED SENSORS FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 993K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OR PISTON PACKS ON CERTAIN 993K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BREAKER PANEL ON CERTAIN 950H, 962H, 966H AND 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BREAKER PANEL ON CERTAIN 950H, 962H, 966H AND 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVELINE BOLTS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRIVELINE BOLTS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON ROD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON ROD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RETIGHTENING THE DRIVE GEAR ON CERTAIN 0R3233, 0R3860, AND 0R9250 ENGINE OIL SCAVENGE PUMPS IN DEALER PARTS STOCK FOR INSTALLATION IN VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REINFORCING FRONT LOADER FRAME STRUCTURE AT THE "A" PIN ON CERTAIN 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REINFORCING FRONT LOADER FRAME STRUCTURE AT THE "A" PIN ON CERTAIN 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTS FOR THE FUEL WATER SEPARATOR AND RELOCATING THE SWITCH FOR THE FUEL WATER SEPARATOR ON CERTAIN D11T AND D11T C/D TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTS FOR THE FUEL WATER SEPARATOR AND RELOCATING THE SWITCH FOR THE FUEL WATER SEPARATOR ON CERTAIN D11T AND D11T C/D TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TILT SWITCH IN THE LEFT-HAND CONTROL GROUP ON CERTAIN 953D, 963D, AND 973D TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TILT SWITCH IN THE LEFT-HAND CONTROL GROUP ON CERTAIN 953D, 963D, AND 973D TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CUSHION HITCH HARNESS ON CERTAIN 657G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CUSHION HITCH HARNESS ON CERTAIN 657G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB POST ASSEMBLY ON CERTAIN D6K TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB POST ASSEMBLY ON CERTAIN D6K TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS