Basic Engine
Show/hide table
NOTICE |
---|
The maximum engine rpm is set and sealed by the manufacturer without the pump and may not be modified. |
- Run the engine until the engine reaches operating temperature.
Show/hide table
Illustration 1 g03549882 - Check low idle rpm (A) and high idle rpm with all attachment functions in neutral.
Show/hide table
Table 1 High Idle (No Load) Low Idle 2675 ± 25 rpm 1300 ± 25 rpm - If the idle is not within the specification in Table 1, adjust idle set screw (A) to correct the idling speed.
Note: Adjust the engine rpm without load.
Caterpillar Information System:
300.9D Mini Hydraulic Excavator Cylinder Speed - Check
2014/01/06 Positive Pin Retention 2 (PPR2) Track Link Assemblies are Now Used on Certain 324D Forest Machines {4169, 4171}
302.7D CR Mini Hydraulic Excavator Cylinder Drift - Check
2014/04/24 A New Engine Front Crankshaft Seal Is Now Used On Certain Machine Applications Equipped With C13 Engines {1160}
2013/12/11 New Caps are Now Used on the Counterweight of Certain 314E Excavators {7056}
311F Excavators Tool Control System Process for Setting Up the Work Tool
Installation Procedure for the 448-1172 Coupler Control Ar {1408, 5057, 7301, 7405, 7557} Installation Procedure for the 448-1172 Coupler Control Ar {1408, 5057, 7301, 7405, 7557}
311F Excavators Tool Control System General Information
2013/12/06 The Window Lock Lever Has Been Improved for Certain D Series Excavators {7310}
300.9D VPS Mini Hydraulic Excavator Machine Systems Fuel Injection Pump
349E Excavator Hydraulic System Main Control Valve
300.9D Mini Hydraulic Excavator Engine Design
311F Excavators Tool Control System Work Tool Parameter - Program
312F GC and 313F GC Excavators Tool Control System Work Tool - Select
2013/12/10 A New Exhaust Manifold is Now Used on Certain 303E CR Mini Hydraulic Excavators {1062}
311F Excavators Tool Control System Combined Function - Electric Control: Default Value of Work Tool Parameters
C27 Engines for Caterpillar Built Machines Muffler and Converter - Remove and Install
311F Excavators Tool Control System Combined Function - Electric Control: Parameter Setting
336F and 340F Excavators Tool Control System One-Way/One or Two Pump - Electric Control
C9.3 Tier 4 Final Engines Fuel Filter Base
Procedure to Install Heated and Insulated Fumes Disposal Hoses and Open Crankcase Ventilation (OCV) Canister Components on Certain 349 Excavators{1074} Procedure to Install Heated and Insulated Fumes Disposal Hoses and Open Crankcase Ventilation (OCV) Canister Components on Certain 349 Excavators{1074}
349E Excavator Hydraulic System Negative Flow Control System
374F Excavator Machine Systems Main Control Valve - Disassemble - Bucket and Boom
349E Excavator Hydraulic System Boom Hydraulic System