Factory Passwords Worksheet
Factory passwords are required to perform the following functions:
- Clear all of the logged events.
- Program the engine monitoring system.
- Program the parameter for the rack limit.
- Program the cooling system parameter.
- Reset the PM interlock.
View the factory password screen on the Electronic Technician. Record the following information:
Show/hide table
Electronic Service Tool Serial Number     |     |
Engine Serial Number     |     |
ECM Serial Number     |     |
Total Tattletale     |     |
Reason Code     |     |
Other parameters     |     |
Injector Calibration Codes
Show/hide table
Injector 1     |     |
Injector 2     |     |
Injector 3     |     |
Injector 4     |     |
Injector 5     |     |
Injector 6     |     |
Injector 7     |     |
Injector 8     |     |
Injector 9     |     |
Injector 10     |     |
Injector 11     |     |
Injector 12     |     |
Injector 13     |     |
Injector 14     |     |
Injector 15     |     |
Injector 16     |     |
Caterpillar Information System:
3126B and 3126E On-highway Engines Idle Shutdown Timer - Test
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Electrical Connectors and Functions
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0770 - FMI 09 (for MUI Engines)
G3406 Engine Engine Oil Level - Check
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0442 - FMI 12
G3516B Engines Ignition Transformers Primary Circuit
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0770 - FMI 09 (for EUI and PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0441 - FMI 12 (for PEEC Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 1168 - FMI 04
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0441 - FMI 12 (for MUI Engines)
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0168 - FMI 03
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Assemble
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 1169 - FMI 02
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 1170 - FMI 02
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Cranks but Will Not Start
3306C Truck Engine Fuel System - Inspect
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0443 - FMI 12
3126B and 3126E On-highway Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
37-MT, 41-MT, and 42-MT Series Starting Motors No Load - Test
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0858 - FMI 03
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0444 - FMI 12 (for MUI and EUI Engines)
3306C Truck Engine Finding Top Center Position for No. 1 Piston
Electronic Modular Control Panel II+ (EMCP II+) Engine Does Not Shutdown (for MUI 3306B, 3406C Engines)
3306C Truck Engine Fuel Injection Nozzle - Test