Rotator Motor and Manifold - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
B     | 9S-3263     | Thread Lock Compound     | 1     |
- Install valve (10). Install bolts (9). Tighten bolts (9) to a torque of 14 N·m (10 lb ft).
Show/hide table
Illustration 1 | g01270156 |
- Install spacer (8) .
Show/hide table
Illustration 2 | g01270314 |
- Apply Tooling (B) to the inside of gear (6). Install gear (6). Apply Tooling (B) to setscrew (7). Install setscrew (7) .
Show/hide table
Illustration 3 | g01270315 |
- Install the rotator motor and manifold (5). Apply Tooling (B) to bolts (4). Install bolts (4). Connect hose assemblies (3) .
Show/hide table
Illustration 4 | g01270140 |
- Install cover (2). Apply Tooling (B) to bolts (1). Install bolts (1).
Show/hide table
Illustration 5 | g01270130 |
Caterpillar Information System:
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Assemble
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator - Remove
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
324D and 325D Forest Machines Machine Systems Window Wiper Motor - Remove and Install
323D Excavator Specifications
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines Muffler
2006/11/20 Secondary Cab Door Release Lever {7308}
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2006/07/03 Installation of an Additional Isolation Valve Prevents Bucket Cylinder Drift {1329, 5057, 5143}
345C Excavator Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
324D and 325D Forest Machines Machine Systems Cab - Remove
324D and 325D Forest Machines Machine Systems Pump and Motor (Cab Tilt) - Remove and Install
C11 and C13 Engines Liquid Level Sensor (Water Separator)
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 03
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 05
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 06
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2006/10/02 The Operation of the Quick Coupler Valve Is Improved {5491}