374F Excavator Machine System Caterpillar


Pressure Switch (Refrigerant Pressure Cutoff)

Usage:

374F L AP4


Illustration 1g06407932

Table 1
Item  Qty  Part  Specification Description 
Working Range (Temperature): 
−30° to 100° C (−22° to 212° F) 
Refrigerant: 
R-134a 
Working Range (High Pressure): 
OFF: 3140 ± 200 kPa (455 ± 29 psi) 
DIFFERENTIAL (Minimum): 590 kPa (86 psi) 
Working Range (Low Pressure): 
OFF: 196 ± 20 kPa (28 ± 3 psi) 
DIFFERENTIAL (Minimum): 20 kPa (3 psi) 

Caterpillar Information System:

324D and 325D Forest Machines Machine Systems Window Wiper Motor - Remove and Install
323D Excavator Specifications
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines Muffler
2006/11/20 Secondary Cab Door Release Lever {7308}
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2006/07/03 Installation of an Additional Isolation Valve Prevents Bucket Cylinder Drift {1329, 5057, 5143}
345C Excavator Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
M313C, M315C, M316C, M318C, M322C and M325C Excavators Air Conditioning and Heating Refrigerant Compressor
345C Excavator Tool Control System System 2: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
345C Excavator Tool Control System System 11: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator - Remove
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Assemble
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Rotator Motor and Manifold - Install
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
324D and 325D Forest Machines Machine Systems Cab - Remove
324D and 325D Forest Machines Machine Systems Pump and Motor (Cab Tilt) - Remove and Install
C11 and C13 Engines Liquid Level Sensor (Water Separator)
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 03
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.