Window Wiper Motor - Remove and Install
- Disconnect hose (1). Remove nuts (2) and wiper arms (3).
Show/hide table
Illustration 2 g01279070 - Remove caps (4).
Show/hide table
Illustration 3 g01279072 - Remove bolts (5) and cover (6).
Show/hide table
Illustration 4 g01279076 Show/hide tableIllustration 5 g01279095 - Disconnect harness assembly (7) from upper wiper motor (8).
- Remove nuts (9). Remove upper wiper motor (8) from the inside of the cab.
Show/hide table
Illustration 1 | g01279069 |
- Disconnect hose (1). Remove nuts (3) and wiper arms (2).
Show/hide table
Illustration 7 g01279082 - Remove caps (4).
Show/hide table
Illustration 8 g01279085 - Open side door (5).
Show/hide table
Illustration 9 g01279088 Show/hide tableIllustration 10 g01279146 - Disconnect harness assembly (6) for lower wiper motor (7). Remove nuts (8) and remove lower wiper motor (7).
Show/hide table
Illustration 6 | g01279080 |
- Install lower wiper motor (7) and nuts (8). Connect harness assembly (6) to lower wiper motor (7).
Show/hide table
Illustration 13 g01279085 - Close side door (5).
Show/hide table
Illustration 14 g01279082 - Install caps (4).
Show/hide table
Illustration 15 g01279080 - Install wiper arms (2) and nuts (3). Connect hose (1).
Show/hide table
Illustration 11 | g01279088 |
Show/hide table
Illustration 12 | g01279146 |
- Install upper wiper motor (8) from the inside of the cab. Install nuts (9). Connect harness assembly (7) for upper wiper motor (8).
Show/hide table
Illustration 18 g01279072 - Install cover (6) and bolts (5).
Show/hide table
Illustration 19 g01279070 - Install caps (4).
Show/hide table
Illustration 20 g01279069 - Install wiper arms (3) and nuts (2). Connect hose (1).
Show/hide table
Illustration 16 | g01279076 |
Show/hide table
Illustration 17 | g01279095 |
Caterpillar Information System:
323D Excavator Specifications
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines Muffler
2006/11/20 Secondary Cab Door Release Lever {7308}
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2006/07/03 Installation of an Additional Isolation Valve Prevents Bucket Cylinder Drift {1329, 5057, 5143}
345C Excavator Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
M313C, M315C, M316C, M318C, M322C and M325C Excavators Air Conditioning and Heating Refrigerant Compressor
345C Excavator Tool Control System System 2: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
345C Excavator Tool Control System System 11: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
345C Excavator Tool Control System System 2: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator - Remove
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Assemble
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Rotator Motor and Manifold - Install
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
324D and 325D Forest Machines Machine Systems Cab - Remove
324D and 325D Forest Machines Machine Systems Pump and Motor (Cab Tilt) - Remove and Install
C11 and C13 Engines Liquid Level Sensor (Water Separator)
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 03