Refrigerant Compressor
Compressor
Show/hide table
Illustration 1 | g00880847 |
Type of 146-0894 Belt ... (8K)-Poly
Displacement per revolution ... 188.0 mL (6.36 fl oz)
Maximum allowable continuous RPM ... 6000
R-134a Refrigerant
DuPont ... SUVA TRANS A/C HFC134a
ICI ... KLEA 134a
Refrigerant Oil
Oil capacity of compressor ... 200.0 mL (6.76 fl oz)
Type of compressor oil ... Denso ND-OIL8
Caterpillar 4C-2959 Air Conditioner Lubricant (PAG)
Magnetic Clutch
Rated voltage of magnetic clutch ... 24 VDC
Resistance ... 14.4 Ohms
Effective pulley diameter ... 140.0 mm (5.50 inches)
Caterpillar Information System:
345C Excavator Tool Control System System 2: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
345C Excavator Tool Control System System 11: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
345C Excavator Tool Control System System 2: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
345C Excavator Tool Control System System 11: Default Value of Work Tool Parameters
345C Excavator Tool Control System System 2: Default Value of Work Tool Parameters
325D Material Handler Hydraulic System Relief Valve (Main) - Test and Adjust
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2447 - FMI 05
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2447 - FMI 06
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2447 - FMI 03
325D Material Handler Hydraulic System Cylinder Drift - Check
325D Material Handler Hydraulic System Swing Speed and Swing Drift on a Slope - Check
C4.4 Industrial Engine Turbocharger - Inspect
345C Excavator Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
2006/07/03 Installation of an Additional Isolation Valve Prevents Bucket Cylinder Drift {1329, 5057, 5143}
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2006/11/20 Secondary Cab Door Release Lever {7308}
C11 and C13 Engines Muffler
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
323D Excavator Specifications
324D and 325D Forest Machines Machine Systems Window Wiper Motor - Remove and Install
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator - Remove
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Assemble