Bucket Cylinder
Show/hide table
| Specifications for Bucket Cylinders | |||||
|---|---|---|---|---|---|
| Part Number for Bucket Cylinder and Seal Group | 133-6868 (1) | 118-3967 (1) | 171-3379 (2) | 154-0743 (2) | 176-4911 (2) |
| (1) Bearing | 119-5229 | ||||
| Outside Diameter | 90 mm (3.543 inch) |
||||
| Inside Diameter | 80 mm (3.150 inch) |
||||
| (2) Bearing | 119-5228 | ||||
| Outside Diameter | 80 mm (3.150 inch) |
||||
| Inside Diameter | 70 mm (2.756 inch) |
||||
| (3) Torque For 2 Fittings | 10 ± 5 N·m (90 ± 40 lb in) |
||||
| (4) Torque for 12 Bolts | 270 ± 40 N·m (200 ± 30 lb ft) |
||||
| (5) Torque for Locknut | 7150 ± 350 N·m (5280 ± 250 lb ft) |
||||
| (6) Torque For Setscrew | 60 ± 10 N·m (42 ± 7 lb ft) |
||||
| (7) Rod Diameter | 85 mm (3.346 inch) |
||||
| Minimum Thickness for Plating | 0.03 mm (0.0012 inch) |
||||
| (8) Bore of Head | 85 mm (3.346 inch) |
||||
| (9) Bore of Cylinder | 120 mm (4.724 inch) |
||||
| (10) | The position that is shown is for the slits that are in the seal. | ||||
Show/hide table
| ( 1 ) | Use Illustration 1. |
| ( 2 ) | Use Illustration 2. |
Show/hide table
 | |
| Illustration 1 | g01003172 |
Show/hide table
 | |
| Illustration 2 | g01003175 |
Show/hide table
| Specifications for Bucket Cylinders | |||||
|---|---|---|---|---|---|
| Part Number for Bucket Cylinder and Seal Group | 133-6867 (3) | 118-3953 (4) | 154-0772 (5) | 123-2084 (5) | 134-6987 (6) |
| (1) Bearing | 119-5214 | 119-5325 | 6E-3535 | ||
| Outside Diameter | 90 mm (3.543 inch) |
95 mm (3.740 inch) |
75.14 mm (2.9583 inch) |
||
| Inside Diameter | 80 mm (3.150 inch) |
60.18 mm (2.3693 inch) |
|||
| (2) Bearing | 119-5214 | 119-5324 | 6E-3535 | ||
| Outside Diameter | 90 mm (3.543 inch) |
85 mm (3.346 inch) |
75.14 mm (2.9583 inch) |
||
| Inside Diameter | 80 mm (3.150 inch) |
70 mm (2.756 inch) |
60.18 mm (2.3693 inch) |
||
| (3) Torque For 2 Fittings | 10 ± 5 N·m (90 ± 40 lb in) |
||||
| (4) Torque for 12 Bolts | 370 ± 50 N·m (270 ± 40 lb ft) |
N/A | |||
| (4) Torque for Head | N/A | 650 ± 70 N·m (480 ± 50 lb ft) |
|||
| (5) Torque for Locknut | 12000 ± 500 N·m (8800 ± 370 lb ft) |
9500 ± 500 N·m (7000 ± 370 lb ft) |
2650 ± 150 N·m (1950 ± 110 lb ft) |
||
| (6) Torque For Setscrew | 60 ± 10 N·m (45 ± 7 lb ft) |
N/A | |||
| (7) Rod Diameter | 100 mm (3.937 inch) |
90 mm (3.543 inch) |
64.93 mm (2.556 inch) |
||
| Minimum Thickness for Plating | 0.03 mm (0.0012 inch) |
||||
| (8) Bore of Head | 100 mm (3.937 inch) |
90 mm (3.543 inch) |
65.63 mm (2.584 inch) |
||
| (9) Bore of Cylinder | 140 mm (5.512 inch) |
130 mm (5.118 inch) |
100 mm (3.937 inch) |
||
| (10) | The position that is shown is for the slits that are in the seal. | N/A | |||
| (11) | The position that is shown is for the slit that is in the rings. | N/A | |||
Show/hide table
| ( 3 ) | Use Illustration 3. |
| ( 4 ) | Use Illustration 4. |
| ( 5 ) | Use Illustration 5. |
| ( 6 ) | Use Illustration 6. |
Show/hide table
 | |
| Illustration 3 | g01003178 |
Show/hide table
 | |
| Illustration 4 | g01003181 |
Show/hide table
 | |
| Illustration 5 | g01003182 |
Show/hide table
 | |
| Illustration 6 | g00908675 |
Caterpillar Information System:
315D, 318D and 319D Excavators Machine Systems Main Hydraulic Pump - Assemble
322C Forest Machine Machine Systems Control Valve (Auxiliary) - Assemble
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
308C Excavator Machine Systems Main Control Valve - Install
M318C Excavator Machine Systems Steering Cylinder - Assemble
M318C and M322C Excavators Machine Systems Steering Cylinder - Disassemble
3064 and 3066 Engines for Caterpillar Built Machines Coolant Temperature Switch
2002/08/12 Special Instruction, REHS1386 , "Procedures for Modifying the Demolition and Scrap Shears for Installation of the New Covers" {6344}
320C Excavator Leaving the Machine
M318C and M322C Excavators Engine Supplement Engine Oil Cooler - Remove and Install
308C Excavator Machine Systems Hydraulic Oil Tank - Install
308C Excavator Machine Systems Heating and Air Conditioning Unit - Remove
308C Excavator Machine Systems Heating and Air Conditioning Unit - Install
5110B Excavator Operator Controls
312C and 315C Excavators Tool Control System Service Tools
2002/09/09 Proper Installation of Exhaust Manifolds {1059}
3056E Industrial Engine Valve Depth - Inspect
320C Material Handler Additional Messages
322C Forest Machine Machine Systems Pilot Valve (Oil Manifold) - Disassemble - NFC Control Valve
Installation of 226-2409 Quick Coupler Conversion Ar {6129, 7000} Installation of 226-2409 Quick Coupler Conversion Ar {6129, 7000}
322C Forest Machine Machine Systems Pilot Valve (Oil Manifold) - Assemble - NFC Control Valve
2002/08/12 A Summary of Revisions Will Start to Appear In Disassembly And Assembly Revisions {1000, 7000}
M316C Wheeled Excavator Machine System Swing Pump