Hydraulic Oil Tank - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 3 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach Tooling (A) on hydraulic tank (10). Use a suitable lifting device. Position hydraulic tank (10) on the machine.
Show/hide table
 | |
| Illustration 1 | g00910869 |
- Install bolts (11) .
Show/hide table
 | |
| Illustration 2 | g00910870 |
- Connect hose assembly (9) .
Show/hide table
 | |
| Illustration 3 | g00910868 |
- Install panel (8) .
Show/hide table
 | |
| Illustration 4 | g00910867 |
- Install block (7) .
Show/hide table
 | |
| Illustration 5 | g00910866 |
- Connect hose assemblies (6) .
Show/hide table
 | |
| Illustration 6 | g00910865 |
- Position harness assembly (3). Install cable strap (4). Connect harness assembly (5).
Show/hide table
 | |
| Illustration 7 | g00910864 |
- Connect hose assemblies (1) .
Show/hide table
 | |
| Illustration 8 | g00910863 |
- Connect hose (2) .
- Fill the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change". The capacity of the hydraulic tank is approximately 55 L (14.5 US gal).
End By: Install the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Caterpillar Information System:
308C Excavator Machine Systems Hydraulic Oil Tank - Remove
320C Material Handler Lifting Capacities
2002/08/12 Revised Special Instruction, REHS1343, "Installation of the Replacement Grease Line" is Available {0645, 0645, 5458, 6501, 6535}
M318C and M322C Excavators Engine Supplement Fan - Remove and Install - Aftercooler
M318C and M322C Excavators Engine Supplement Fan Guard - Remove and Install - Aftercooler
M315C Wheeled Hydraulic Excavator Machine System Stick - 2.6 m (8.53 ft)
2002/08/26 VIMS Service Port Information {7601}
M316C Wheeled Excavator Machine System Stick - 2400 mm (7.9 ft)
2002/10/28 New XT-6 ES Hoses are Available {5057, 5102}
M316C Wheeled Excavator Machine System Stick - 2100 mm (6.9 ft)
320C, 322C and 325C Excavators Tool Control System Switches
2010/05/13 Skirt Material for the Repair of the Upper Frame Is Available {7051}
M318C and M322C Excavators Engine Supplement Engine Oil Cooler - Remove and Install
320C Excavator Leaving the Machine
2002/08/12 Special Instruction, REHS1386 , "Procedures for Modifying the Demolition and Scrap Shears for Installation of the New Covers" {6344}
3064 and 3066 Engines for Caterpillar Built Machines Coolant Temperature Switch
M318C and M322C Excavators Machine Systems Steering Cylinder - Disassemble
M318C Excavator Machine Systems Steering Cylinder - Assemble
308C Excavator Machine Systems Main Control Valve - Install
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
322C Forest Machine Machine Systems Control Valve (Auxiliary) - Assemble
315D, 318D and 319D Excavators Machine Systems Main Hydraulic Pump - Assemble
320B Excavator Machine System Specifications Bucket Cylinder