Fan - Remove and Install - Aftercooler
Removal Procedure
Start By:
- Remove the fan guard. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install".
- Remove bolts (3), fan (1), and spacer (2) .
Show/hide table
 | |
| Illustration 1 | g00910095 |
Installation Procedure
- Position spacer (2) and fan (1) and install bolts (3) .
Show/hide table
| | |
| Illustration 2 | g00910095 |
End By: Install the fan guard. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install".
Caterpillar Information System:
M318C and M322C Excavators Engine Supplement Fan Guard - Remove and Install - Aftercooler
M315C Wheeled Hydraulic Excavator Machine System Stick - 2.6 m (8.53 ft)
2002/08/26 VIMS Service Port Information {7601}
M316C Wheeled Excavator Machine System Stick - 2400 mm (7.9 ft)
2002/10/28 New XT-6 ES Hoses are Available {5057, 5102}
M316C Wheeled Excavator Machine System Stick - 2100 mm (6.9 ft)
320C, 322C and 325C Excavators Tool Control System Switches
2010/05/13 Skirt Material for the Repair of the Upper Frame Is Available {7051}
322C Forest Machine Machine Systems Expansion Valve - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Pilot Oil Filter and Relief Valve
M318C Excavator Machine Systems Check Valve (Drift Reduction) - Install
M318C and M322C Excavators Machine Systems Check Valve (Drift Reduction) - Remove
2002/08/12 Revised Special Instruction, REHS1343, "Installation of the Replacement Grease Line" is Available {0645, 0645, 5458, 6501, 6535}
320C Material Handler Lifting Capacities
308C Excavator Machine Systems Hydraulic Oil Tank - Remove
308C Excavator Machine Systems Hydraulic Oil Tank - Install
M318C and M322C Excavators Engine Supplement Engine Oil Cooler - Remove and Install
320C Excavator Leaving the Machine
2002/08/12 Special Instruction, REHS1386 , "Procedures for Modifying the Demolition and Scrap Shears for Installation of the New Covers" {6344}
3064 and 3066 Engines for Caterpillar Built Machines Coolant Temperature Switch
M318C and M322C Excavators Machine Systems Steering Cylinder - Disassemble
M318C Excavator Machine Systems Steering Cylinder - Assemble
308C Excavator Machine Systems Main Control Valve - Install
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test