320C Material Handler Caterpillar

Lifting Capacities

Usage:

320C EGA

Show/hide table




Illustration 1	g00586902

Show/hide table

Table 1
320C MH HW Excavator with a 6.65 m (21.8 ft) boom, a 5.45 m (17 ft 10.5 inch) stick, no work tool, and 600 mm (23.6 inch) triple grouser track shoes ⁽¹⁾ All capacities are in kilograms.
Radius	1.5 m		3.0 m		4.5 m		6.0 m
Load Point Height	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load
10.5 m
9.0 m
7.5 m
6.0 m
4.5 m							5130 ⁽²⁾
3.0 m			10760 ⁽²⁾		7400 ⁽²⁾		5750 ⁽²⁾
1.5 m			13620 ⁽²⁾		8580 ⁽²⁾		6340 ⁽²⁾	6020
0.0 m			8000 ⁽²⁾		9180 ⁽²⁾	8430	6680 ⁽²⁾	5600
-1.5 m	5160 ⁽²⁾		7700 ⁽²⁾		9040 ⁽²⁾	8030	6660 ⁽²⁾	5320
-3.0 m	6040 ⁽²⁾		8120 ⁽²⁾		8230 ⁽²⁾	7890	6220 ⁽²⁾	5200
-4.5 m			8650 ⁽²⁾		6810 ⁽²⁾		5280 ⁽²⁾	5200
-6.0 m							3720 ⁽²⁾

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by tipping. The loads do not exceed 87 percent of hydraulic capacity or 75 percent of tipping capacity. The weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 2
320C MH HW Excavator with a 6.65 m (21.8 ft) boom, a 5.45 m (17 ft 10.5 inch) stick, no work tool, and 600 mm (23.6 inch) triple grouser track shoes ⁽¹⁾ All capacities are in kilograms.
Radius	7.5		9 m		10.5 m		Maximum Reach		m
Load Point Height	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load	m
10.5 m							4340 ⁽²⁾		7.18
9.0 m	4060 ⁽²⁾						3880 ⁽²⁾		8.69
7.5 m	4040 ⁽²⁾		3760 ⁽²⁾				3640 ⁽²⁾	3270	9.74
6.0 m	4180 ⁽²⁾		3810 ⁽²⁾	3730			3500 ⁽²⁾	2830	10.47
4.5 m	4450 ⁽²⁾		3940 ⁽²⁾	3610	3530 ⁽²⁾	2750	3420 ⁽²⁾	2550	10.94
3.0 m	4770 ⁽²⁾	4620	4100 ⁽²⁾	3450	3580 ⁽²⁾	2670	3360 ⁽²⁾	2380	11.19
1.5 m	5070 ⁽²⁾	4330	4240 ⁽²⁾	3290	3610 ⁽²⁾	2570	3320 ⁽²⁾	2300	11.24
0.0 m	5240 ⁽²⁾	4080	4290 ⁽²⁾	3140	3550 ⁽²⁾	2490	3270 ⁽²⁾	2290	11.08
-1.5 m	5200 ⁽²⁾	3910	4180 ⁽²⁾	3030	3330 ⁽²⁾	2440	3210 ⁽²⁾	2370	10.71
-3.0 m	4850 ⁽²⁾	3820	3820 ⁽²⁾	2980			3100 ⁽²⁾	2560	10.11
-4.5 m	4100 ⁽²⁾	3830	3030 ⁽²⁾	3010			2870 ⁽²⁾		9.21
-6 m	2720 ⁽²⁾

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by tipping. The loads do not exceed 87 percent of hydraulic capacity or 75 percent of tipping capacity. The weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 3
320C MH Square Undercarriage Excavator with a 6.65 m (21.8 ft) boom, a 5.45 m (17 ft 10.5 inch) stick, no work tool, and 600 mm (23.6 inch) triple grouser track shoes ⁽¹⁾ All capacities are in kilograms.
Radius	1.5 m		3.0 m		4.5 m		6.0 m
Load Point Height	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load	Front Load	Side Load
10.5 m
9.0 m
7.5 m
6.0 m							4660 ⁽²⁾
4.5 m							5150 ⁽²⁾
3.0 m			10830 ⁽²⁾		7420 ⁽²⁾		5770 ⁽²⁾
1.5 m			13660 ⁽²⁾		8600 ⁽²⁾		6350 ⁽²⁾
0.0 m			7980 ⁽²⁾		9180 ⁽²⁾		6690 ⁽²⁾
-1.5 m	5180 ⁽²⁾		7710 ⁽²⁾		9030 ⁽²⁾		6660 ⁽²⁾
-3.0 m	6050 ⁽²⁾		8130 ⁽²⁾		8210 ⁽²⁾		6200 ⁽²⁾
-4.5 m			8660 ⁽²⁾		6780 ⁽²⁾		5260 ⁽²⁾
-6.0 m							3680 ⁽²⁾

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by tipping. The loads do not exceed 87 percent of hydraulic capacity or 75 percent of tipping capacity. The weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 4
320C MH Square Undercarriage Excavator with a 6.65 m (21.8 ft) boom, a 5.45 m (17 ft 10.5 inch) stick, no work tool, and 600 mm (23.6 inch) triple grouser track shoes ⁽¹⁾ All capacities are in kilograms.
Radius Height	7.5 m		9.0 m		10.5 m		Maximum Reach		m
Radius Height	Front	Side	Front	Side	Front	Side	Front	Side	m
10.5 m							4330 ⁽²⁾		7.22
9.0 m	4060 ⁽²⁾						3870 ⁽²⁾		8.71
7.5 m	4040 ⁽²⁾		3760 ⁽²⁾				3640 ⁽²⁾		9.76
6.0 m	4190 ⁽²⁾		3810 ⁽²⁾		3500 ⁽²⁾		3500 ⁽²⁾		10.47
4.5 m	4450 ⁽²⁾		3940 ⁽²⁾		3530 ⁽²⁾	3460	3420 ⁽²⁾	3210	10.95
3.0 m	4780 ⁽²⁾		4100 ⁽²⁾		3580 ⁽²⁾	3370	3360 ⁽²⁾	3030	11.2
1.5 m	5070 ⁽²⁾		4240 ⁽²⁾	4150	3610 ⁽²⁾	3270	3320 ⁽²⁾	2940	11.24
0.0 m	5240 ⁽²⁾	5210	4290 ⁽²⁾	4000	3550 ⁽²⁾	3190	3270 ⁽²⁾	2950	11.08
-1.5 m	5190 ⁽²⁾	5030	4170 ⁽²⁾	3890	3330 ⁽²⁾	3140	3210 ⁽²⁾	3050	10.71
-3.0 m	4840 ⁽²⁾		3800 ⁽²⁾				3090 ⁽²⁾		10.09
-4.5 m	4080 ⁽²⁾		3010 ⁽²⁾				2860 ⁽²⁾		9.19
-6.0 m	2680 ⁽²⁾

Show/hide table

^( 1 )	"ISO 10567" "SAE J1097"
^( 2 )	Capacity is limited by hydraulics rather than by tipping. The loads do not exceed 87 percent of hydraulic capacity or 75 percent of tipping capacity. The weight of all lifting accessories must be subtracted from the lifting capacities.

Caterpillar Information System:

2002/08/12 Revised Special Instruction, REHS1343, "Installation of the Replacement Grease Line" is Available {0645, 0645, 5458, 6501, 6535}

M318C and M322C Excavators Engine Supplement Fan - Remove and Install - Aftercooler

M318C and M322C Excavators Engine Supplement Fan Guard - Remove and Install - Aftercooler

M315C Wheeled Hydraulic Excavator Machine System Stick - 2.6 m (8.53 ft)

2002/08/26 VIMS Service Port Information {7601}

M316C Wheeled Excavator Machine System Stick - 2400 mm (7.9 ft)

2002/10/28 New XT-6 ES Hoses are Available {5057, 5102}

M316C Wheeled Excavator Machine System Stick - 2100 mm (6.9 ft)

320C, 322C and 325C Excavators Tool Control System Switches

2010/05/13 Skirt Material for the Repair of the Upper Frame Is Available {7051}

322C Forest Machine Machine Systems Expansion Valve - Remove and Install

TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Pilot Oil Filter and Relief Valve

308C Excavator Machine Systems Hydraulic Oil Tank - Remove

308C Excavator Machine Systems Hydraulic Oil Tank - Install

M318C and M322C Excavators Engine Supplement Engine Oil Cooler - Remove and Install

320C Excavator Leaving the Machine

2002/08/12 Special Instruction, REHS1386 , "Procedures for Modifying the Demolition and Scrap Shears for Installation of the New Covers" {6344}

3064 and 3066 Engines for Caterpillar Built Machines Coolant Temperature Switch

M318C and M322C Excavators Machine Systems Steering Cylinder - Disassemble

M318C Excavator Machine Systems Steering Cylinder - Assemble

308C Excavator Machine Systems Main Control Valve - Install

3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test

C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover

322C Forest Machine Machine Systems Control Valve (Auxiliary) - Assemble