Vibration Damper and Pulley - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-7117 | Breaker Bar | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tool (A) to release the tension on drive belt (1). Remove drive belt (1) .
Show/hide table
 | |
| Illustration 1 | g00650392 |
- Remove eight bolts (2), the washers, crankshaft vibration damper (3), and one spacer from the crankshaft pulley.
Show/hide table
 | |
| Illustration 2 | g00650394 |
- Remove four bolts (4) and the washer.
Show/hide table
 | |
| Illustration 3 | g00650403 |
- Remove crankshaft pulley (5) .
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-7117 | Breaker Bar | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position crankshaft pulley (5). Install four bolts (4) and the washer. Tighten the bolts to a torque of 190 ± 30 N·m (140 ± 22 lb ft).
Show/hide table
| | |
| Illustration 4 | g00650403 |
- Install one spacer and crankshaft vibration damper (3). Install eight bolts (2) and the washers. Tighten eight bolts (2) to a torque of 55 ± 10 N·m (40 ± 7 lb ft).
Show/hide table
| | |
| Illustration 5 | g00650394 |
- Use Tool (A) to install drive belt (1) .
Show/hide table
| | |
| Illustration 6 | g00650392 |
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Piston Cooling Jet
3126B Marine Engine Unit Injector Hydraulic Pump - Install
3126B Marine Engine Crankshaft - Remove
3126B Marine Engine Unit Injector Hydraulic Pump - Remove
3126B Marine Engine Injection Actuation Pressure Control Valve - Install
3126B Marine Engine Injection Actuation Pressure Control Valve - Remove
3054 and 3056 Industrial and Generator Set Engines General Coolant Information
3126B Marine Engine Crankshaft - Install
3126B Marine Engine Unit Injector Sleeve - Remove
3126B Marine Engine Unit Injector - Install
3524B Engines for Off-Highway Trucks Can Not Reach Top Engine RPM
3126B Engines for Caterpillar Built Machines Unit Injector - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Install
3126B Marine Engine Front Cover - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Housing (Front) - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble
3126B Marine Engine Housing (Front) - Install
3126B Marine Engine Lifter Group - Remove and Install
3126B Marine Engine Cylinder Head - Remove
3126B Marine Engine Cylinder Head - Install
C-10 and C-12 Industrial Engines Speed/Timing Sensor