Piston Cooling Jet
Show/hide table
Illustration 1 | g01416036 |
The piston cooling jets (3) must be checked for the location of the stream of oil. Insert a drill rod with a diameter of
Use the following dimensions in order to locate point (2) and point (1).
- Dimension (A) ...
38.44 ± 0.25 mm (1.513 ± 0.010 inch) - Dimension (B) ...
52.30 ± 0.25 mm (2.059 ± 0.010 inch) - Dimension (C) ...
15.46 ± 0.25 mm (0.609 ± 0.010 inch) - Dimension (D) ...
250.00 ± 0.25 mm (9.842 ± 0.010 inch) - Dimension (E) ...
4.4 mm (0.17 inch) - Dimension (B) ...
Show/hide table
Illustration 2 | g01325266 |
(4) Piston cooling jet |
(5) Torque for the bolt ...
Caterpillar Information System:
3126B Marine Engine Unit Injector Hydraulic Pump - Install
3126B Marine Engine Crankshaft - Remove
3126B Marine Engine Unit Injector Hydraulic Pump - Remove
3126B Marine Engine Injection Actuation Pressure Control Valve - Install
3126B Marine Engine Injection Actuation Pressure Control Valve - Remove
3054 and 3056 Industrial and Generator Set Engines General Coolant Information
3126B Marine Engine Crankshaft - Install
3126B Marine Engine Unit Injector Sleeve - Remove
3126B Marine Engine Unit Injector - Install
3524B Engines for Off-Highway Trucks Can Not Reach Top Engine RPM
3126B Engines for Caterpillar Built Machines Unit Injector - Remove
3003, 3013, 3014 and 3024 Industrial Engines Coolant Recommendations
3126B Marine Engine Vibration Damper and Pulley - Remove and Install
3126B Engines for Caterpillar Built Machines Camshaft - Install
3126B Marine Engine Front Cover - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Housing (Front) - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble
3126B Marine Engine Housing (Front) - Install
3126B Marine Engine Lifter Group - Remove and Install
3126B Marine Engine Cylinder Head - Remove
3126B Marine Engine Cylinder Head - Install