Unit Injector Hydraulic Pump - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position drive gear (10) on the unit injector hydraulic pump. Install bolt (8) and washer (9) on the unit injector hydraulic pump. Tighten bolt (8) to a torque of 110 ± 14 N·m (81 ± 10 lb ft).
Show/hide table
Illustration 1 | g00642313 |
- Install O-ring seal (7) on the unit injector hydraulic pump.
- Position the unit injector hydraulic pump on the timing gear housing. Install three bolts (6) and tighten three bolts (6) to a torque of 28 ± 7 N·m (20 ± 5 lb ft).
Show/hide table
Illustration 2 | g00639960 |
- Install return line (5) and fitting (2) .
- Install high pressure oil supply line (1) .
- Install fuel line (4) .
- Connect electrical plug (3) .
Caterpillar Information System:
3126B Marine Engine Crankshaft - Remove
3126B Marine Engine Unit Injector Hydraulic Pump - Remove
3126B Marine Engine Injection Actuation Pressure Control Valve - Install
3126B Marine Engine Injection Actuation Pressure Control Valve - Remove
3054 and 3056 Industrial and Generator Set Engines General Coolant Information
3126B Marine Engine Crankshaft - Install
3126B Marine Engine Unit Injector Sleeve - Remove
3126B Marine Engine Unit Injector - Install
3524B Engines for Off-Highway Trucks Can Not Reach Top Engine RPM
3126B Engines for Caterpillar Built Machines Unit Injector - Remove
3003, 3013, 3014 and 3024 Industrial Engines Coolant Recommendations
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Conservation Practices
3176C and 3196 Engines for Caterpillar Built Machines Piston Cooling Jet
3126B Marine Engine Vibration Damper and Pulley - Remove and Install
3126B Engines for Caterpillar Built Machines Camshaft - Install
3126B Marine Engine Front Cover - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Housing (Front) - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble
3126B Marine Engine Housing (Front) - Install
3126B Marine Engine Lifter Group - Remove and Install
3126B Marine Engine Cylinder Head - Remove