Injection Actuation Pressure Control Valve - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-0333     | Crowfoot Wrench     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the injection actuation pressure control valve and the components for the injection actuation pressure control valve.
- Install new O-ring seals (4) and (6), and backup ring (5) on the injection actuation pressure control valve. Lubricate the O-ring seals with clean engine oil.
Show/hide table
Illustration 1 | g00615757 |
- Use Tool (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten the injection actuation pressure control valve to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
- Install solenoid valve (7), spacer (8), and nut (3) on the injection actuation pressure control valve (1). Tighten nut (3) to a torque of 5.5 ± 1.5 N·m (49 ± 13 lb in).
Show/hide table
Illustration 2 | g00639954 |
- Reconnect wiring harness plug (2) to the injection actuation pressure control valve.
Caterpillar Information System:
3126B Marine Engine Injection Actuation Pressure Control Valve - Remove
3054 and 3056 Industrial and Generator Set Engines General Coolant Information
3126B Marine Engine Crankshaft - Install
3126B Marine Engine Unit Injector Sleeve - Remove
3126B Marine Engine Unit Injector - Install
3524B Engines for Off-Highway Trucks Can Not Reach Top Engine RPM
3126B Engines for Caterpillar Built Machines Unit Injector - Remove
3003, 3013, 3014 and 3024 Industrial Engines Coolant Recommendations
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Conservation Practices
3618 Engine Crankshaft Main Bearings - Remove
3612 and 3616 Engines Cylinder Head - Remove
C-10 and C-12 Truck Engines Water Pump
3126B Marine Engine Unit Injector Hydraulic Pump - Remove
3126B Marine Engine Crankshaft - Remove
3126B Marine Engine Unit Injector Hydraulic Pump - Install
3176C and 3196 Engines for Caterpillar Built Machines Piston Cooling Jet
3126B Marine Engine Vibration Damper and Pulley - Remove and Install
3126B Engines for Caterpillar Built Machines Camshaft - Install
3126B Marine Engine Front Cover - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Housing (Front) - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble