Speed/Timing Sensor
Camshaft Position Sensor
Show/hide table
 | |
| Illustration 1 | g00640258 |
Camshaft position sensor | |
(1) Sensor
(2) Bracket
Ensure that the bracket is installed in the orientation that is shown.
(3) Tighten the bolt to the following torque: ... 28 ± 7 N·m (21 ± 5 lb ft)
Ensure that the sensor is seated before the bolt is tightened.
Crankshaft Position Sensor
Show/hide table
 | |
| Illustration 2 | g00640259 |
Crankshaft position sensor | |
(1) Sensor
(2) Bracket
Ensure that the bracket is installed in the orientation that is shown.
(3) Tighten the bolt to the following torque: ... 28 ± 7 N·m (21 ± 5 lb ft)
Ensure that the sensor is seated before the bolt is tightened.
Caterpillar Information System:
3126B Marine Engine Cylinder Head - Install
3126B Marine Engine Cylinder Head - Remove
3126B Marine Engine Lifter Group - Remove and Install
3126B Marine Engine Housing (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3126B Marine Engine Housing (Front) - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Front Cover - Remove
3126B Engines for Caterpillar Built Machines Camshaft - Install
3126B Marine Engine Vibration Damper and Pulley - Remove and Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
3054B Industrial Engine Engine Design
3054B Industrial Engine Fuel Injection Pump
3406E Truck Engine Cylinder Head Valves
3054B Industrial Engine Fuel Injection Nozzles
3612 and 3616 Engines Cylinder Head - Install
C-10 and C-12 Truck Engines Fuel Priming Pump and Primary Fuel Filter
3054B Industrial Engine Cylinder Head Valves
3114, 3116, and 3126 Engines for Caterpillar Built Machines Engine Balancer Shaft - Remove and Install
3054B Industrial Engine Cylinder Head
3054B Industrial Engine Exhaust Manifold
C-9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump