3054B Industrial Engine Caterpillar


Engine Design

Usage:

3054B 5MF



Illustration 1g00296424

Cylinder and valve location

(A) Exhaust valves

(B) Inlet valves

Bore ... 103 mm (4.055 inch)

Stroke ... 127 mm (5.00 inch)

Displacement ... 4.2 L (256 in3)

Arrangement and cylinders ... In-line four cylinder

Type of combustion ... Direct injection

Compression Ratio ... 17.25:1

Number of cylinders ... 4

Valves per cylinder ... 2

Valve Lash

Inlet valve ... 0.20 mm (0.008 inch)
Exhaust valve ... 0.45 mm (0.018 inch)

Firing Order ... 1, 3, 4, 2

When the crankshaft is viewed from the front of the engine the crankshaft rotates in the following direction: ... Clockwise

When the camshaft is viewed from the front of the engine the camshaft rotates in the following direction: ... Clockwise

The front end of the engine is opposite the flywheel end. The left side and the right side of the engine are viewed from the flywheel end. The No. 1 cylinder is the front cylinder.

Caterpillar Information System:

3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
C-10 and C-12 Industrial Engines Speed/Timing Sensor
3126B Marine Engine Cylinder Head - Install
3126B Marine Engine Cylinder Head - Remove
3126B Marine Engine Lifter Group - Remove and Install
3126B Marine Engine Housing (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Water Pump - Disassemble
3054 and 3056 Industrial and Generator Set Engines Crankshaft Vibration Damper - Inspect
3126B Engines for Caterpillar Built Machines Camshaft - Remove
3126B Marine Engine Housing (Front) - Remove
3126B Marine Engine Front Cover - Install
3126B Marine Engine Front Cover - Remove
3054B Industrial Engine Fuel Injection Pump
3406E Truck Engine Cylinder Head Valves
3054B Industrial Engine Fuel Injection Nozzles
3612 and 3616 Engines Cylinder Head - Install
C-10 and C-12 Truck Engines Fuel Priming Pump and Primary Fuel Filter
3054B Industrial Engine Cylinder Head Valves
3114, 3116, and 3126 Engines for Caterpillar Built Machines Engine Balancer Shaft - Remove and Install
3054B Industrial Engine Cylinder Head
3054B Industrial Engine Exhaust Manifold
C-9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
Emergency Stop Circuit Improvement for the Electronic Instrument Panel to Control Engine Restart{7451} Emergency Stop Circuit Improvement for the Electronic Instrument Panel to Control Engine Restart{7451}
3126B and 3126E On-highway Engines Tachometer Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.