Indicators and Gauges - Test
Show/hide table
Illustration 1 | g00612702 |
- Look for broken lenses on the gauges, broken indicator lights, broken switches, and other broken components in the cab.
- Start the engine.
- Look for inoperative gauges.
- Turn on all machine lights. Check for proper operation.
- Move the machine forward. Release the travel levers and the travel pedals. The machine should stop.
- Stop the engine.
- Make any repairs that are required before operating the machine.
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Gutter Brush Adjustment
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
307B Excavator Machine Systems Blade Cylinder - Disassemble
307B Excavator Machine System Specifications Relief Valve (Pilot)
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Install
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Overload Warning Device
307B Excavator Seat Heater - If Equipped
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
330B Excavator Material Handler Machine Systems Boom Cylinder - Remove
C-9 Engines for Caterpillar Built Machines Engine Oil Pan
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install
C15 and C18 Petroleum Generator Sets Engine Operation with Intermittent Diagnostic Codes
3114, 3116 and 3126 MUI Engine Governors Installation of Governor on 1U7326 Governor Calibration Bench
307B Excavator Machine Systems Blade Cylinder - Assemble
307B Excavator Quick Coupler Control - If Equipped
BP15 Pickup Broom Maintenance Interval Schedule