Blade Cylinder - Disassemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
(A) | (1) Hydraulic Cylinder Repair Stand | 1 | |
3S-6224 | Electric Hydraulic Pump | 1 | |
8T-0820 | Pressure Gauge | 1 | |
3B-7722 | Bushing | 2 | |
1P-2376 | Coupler Assembly | 2 | |
1P-2377 | Plug | 2 | |
8F-0024 | Hose Assembly | 2 | |
(B) | 4C-4466 | 55 mm Socket | 1 |
(C) | 9U-7868 | Spanner Wrench | 1 |
9U-7872 | Adapter Plate | 1 |
Show/hide table
(1) | If the Wolff Hydraulic Cylinder Repair Stand is not available to disassemble the blade cylinder, consult the Caterpillar Service Technology Group. |
Start By:
- Remove the blade cylinder. Refer to Disassembly and Assembly, "Blade Cylinder - Remove" in this manual.
- Put the blade cylinder in Tooling (A). The weight of the blade cylinder is
25 kg (55 lb) . - Remove two bolts (2). Remove connector assembly (1). Remove O-ring seal (3). Remove flange (6). Remove O-ring seal (8).
- Remove two bolts (5). Remove connector assembly (5). Remove O-ring seal (7).
- Remove lock ring (26) from cover (16).
- Use Tooling (C) to unscrew cover (16) from cylinder assembly (14).
- Use Tooling (A) to slide rod assembly (15) out of cylinder assembly (14).
- Remove seal assembly (12) from piston (13).
- Use Tooling (B) to remove locknut (11) that holds piston (13) to rod assembly (15). Remove piston (13) from rod assembly (15).
- Remove head (19) and cover (16) from rod assembly (15).
- Remove O-ring seal (24), O-ring seal (20) and ring (21) from head (19).
- Remove lip type seal (25), seal (23) and seal (22) from head (19).
- Remove lip type seals (9) from cylinder assembly (14). Remove bearing (10) from cylinder assembly (14).
- Remove lip type seals (17) from rod assembly (15). Remove bearing (18) from rod assembly (15).
Show/hide table
Illustration 1 | g00612635 |
Caterpillar Information System:
307B Excavator Machine System Specifications Relief Valve (Pilot)
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Install
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Disassemble
307B Excavator Machine System Specifications Boom - 3550 mm (139.8 inch)
307B Excavator Machine Systems Blade Cylinder - Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
BP15 Pickup Broom Gutter Brush Adjustment
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
307B Excavator Indicators and Gauges - Test
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Overload Warning Device
307B Excavator Seat Heater - If Equipped
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
330B Excavator Material Handler Machine Systems Boom Cylinder - Remove