307B Excavator Machine System Specifications Caterpillar


Relief Valve (Pilot)

Usage:

307B AFB



Illustration 1g00612546

(1) Torque for plug ... 215 ± 25 N·m (159 ± 18.5 lb ft)

(2) 8J-0322 Spring

Outside diameter ... 0.438 mm (0.017 inch)
Free length ... 1.656 mm (0.065 inch)

Caterpillar Information System:

3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Install
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Disassemble
307B Excavator Machine System Specifications Boom - 3550 mm (139.8 inch)
307B Excavator Machine Systems Blade Cylinder - Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3126B Engines for Caterpillar Built Machines Housing (Front) - Remove
307B Excavator Machine Systems Blade Cylinder - Disassemble
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
BP15 Pickup Broom Gutter Brush Adjustment
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
307B Excavator Indicators and Gauges - Test
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Overload Warning Device
307B Excavator Seat Heater - If Equipped
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.